4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevche...@linux.intel.com>


[ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ]

On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO,
requires 2.0v, while the host, according to Intel Merrifield TRM,
supports 1.8v supply only.

The card announces itself as

  mmc2: new ultra high speed DDR50 SDIO card at address 0001

Introduce a custom OCR mask for SDIO host controller on Intel Merrifield
and add a special case to sdhci_set_power_noreg() to override 2.0v supply
by enforcing 1.8v power choice.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hun...@intel.com>
Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>
Signed-off-by: Sasha Levin <alexander.le...@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-pci-core.c |    2 ++
 drivers/mmc/host/sdhci.c          |    7 +++++++
 2 files changed, 9 insertions(+)

--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -805,6 +805,8 @@ static int intel_mrfld_mmc_probe_slot(st
                slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
                break;
        case INTEL_MRFLD_SDIO:
+               /* Advertise 2.0v for compatibility with the SDIO card's OCR */
+               slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195;
                slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE |
                                         MMC_CAP_POWER_OFF_CARD;
                break;
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1470,6 +1470,13 @@ void sdhci_set_power_noreg(struct sdhci_
        if (mode != MMC_POWER_OFF) {
                switch (1 << vdd) {
                case MMC_VDD_165_195:
+               /*
+                * Without a regulator, SDHCI does not support 2.0v
+                * so we only get here if the driver deliberately
+                * added the 2.0v range to ocr_avail. Map it to 1.8v
+                * for the purpose of turning on the power.
+                */
+               case MMC_VDD_20_21:
                        pwr = SDHCI_POWER_180;
                        break;
                case MMC_VDD_29_30:


Reply via email to