On Tue 2018-04-10 06:50:29, Tony Lindgren wrote: > * Pavel Machek <pa...@ucw.cz> [180410 11:00]: > > On Mon 2018-04-09 07:08:47, Tony Lindgren wrote: > > > * Dan Williams <d...@redhat.com> [180408 02:46]: > > > > On Sat, 2018-04-07 at 14:22 +0200, Pavel Machek wrote: > > > > > I tried --location-enable-gps-unmanaged , but that did not work for > > > > > me. > > > > > > > > That requires a TTY that would spit out the GPS data; in this mode MM > > > > only sends the start/stop commands, and what comes out the GPS TTY is > > > > undefined (at least by MM). > > > > > > > > So unless you know that one of the 6600's TTYs does GPS and in what > > > > format it does GPS, then no. > > > > > > There should be a NMEA port within the unknown port range ttyUSB[123]. > > > > > > Is there some easy way to enable --location-enable-gps-unmanaged for > > > testing so I can check if GPS gets enabled for one of the ports? > > > > This should be userful for testing: > > > > Just pass --pds-start-gps and you should get NMEA on stdout. > > Hmm maybe also try to check if enabling the GPS this way starts > printing something out of /dev/ttyUSB[123]?
No, I did not find anything there :-(.
This combination seems to give me working gps:
sudo src/qmicli/qmicli -d /dev/cdc-wdm0 --pds-start-gps | nc -u 127.0.0.1 5000
/usr/sbin/gpsd -ND 4 udp://127.0.0.1:5000
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
