On 2018-04-09 19:28, Vivek Gautam wrote:
Hi Can,On 3/27/2018 12:48 PM, Can Guo wrote:Add UFS PHY support to make SDM845 UFS work with common PHY framework. Signed-off-by: Can Guo <c...@codeaurora.org> ---drivers/phy/qualcomm/phy-qcom-qmp.c | 130 +++++++++++++++++++++++++++++++++---drivers/phy/qualcomm/phy-qcom-qmp.h | 8 +++ 2 files changed, 127 insertions(+), 11 deletions(-)diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.cindex 5cf2c3c..0b58030 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -156,6 +156,11 @@ enum qphy_reg_layout { [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, }; +static const unsigned int sdm845_ufsphy_regs_layout[] = { + [QPHY_START_CTRL] = 0x00, + [QPHY_PCS_READY_STATUS] = 0x168, +}; + static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), @@ -601,6 +606,73 @@ enum qphy_reg_layout { QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60), }; +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f), + + /* Rate B */ + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44), +}; + +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06), +}; + +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80), +}; + +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02), +}; /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { @@ -652,6 +724,9 @@ struct qmp_phy_cfg { /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ unsigned int tx_b_lane_offset; unsigned int rx_b_lane_offset; + + /* true, if PCS block has no separate SW_RESET register */ + bool skip_sw_rst; }; /**@@ -748,6 +823,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)"aux", "cfg_ahb", "ref", "com_aux", }; +static const char * const sdm845_ufs_phy_clk_l[] = { + "ref",did you miss adding 'ref_aux' clock here as in the v2 version? Rest looks good. After this change, you can add my reviewed-by Reviewed-by: Vivek Gautam <vivek.gau...@codeaurora.org> Thanks Vivek
Thank you Vivek. I removed 'ref_aux' as it was from the old UFS PHY driver. And I have tested the new patch on MTP845 V2, it worked fine. Do you have
any concerns about it? Thanks Can
+}; + /* list of resets */ static const char * const msm8996_pciephy_reset_l[] = { "phy", "common", "cfg",@@ -758,7 +837,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)}; /* list of regulators */ -static const char * const msm8996_phy_vreg_l[] = { +static const char * const qmp_phy_vreg_l[] = { "vdda-phy", "vdda-pll", };@@ -778,8 +857,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val).num_clks = ARRAY_SIZE(msm8996_phy_clk_l), .reset_list = msm8996_pciephy_reset_l, .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l), - .vreg_list = msm8996_phy_vreg_l, - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), .regs = pciephy_regs_layout, .start_ctrl = PCS_START | PLL_READY_GATE_EN,@@ -809,8 +888,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val).num_clks = ARRAY_SIZE(msm8996_phy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), - .vreg_list = msm8996_phy_vreg_l, - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), .regs = usb3phy_regs_layout, .start_ctrl = SERDES_START | PCS_START,@@ -870,8 +949,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val).num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), - .vreg_list = msm8996_phy_vreg_l, - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), .regs = qmp_v3_usb3phy_regs_layout, .start_ctrl = SERDES_START | PCS_START,@@ -903,8 +982,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val).num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), - .vreg_list = msm8996_phy_vreg_l, - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), .regs = qmp_v3_usb3phy_regs_layout, .start_ctrl = SERDES_START | PCS_START,@@ -916,6 +995,30 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val).pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { + .type = PHY_TYPE_UFS, + .nlanes = 2, + + .serdes_tbl = sdm845_ufsphy_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl), + .tx_tbl = sdm845_ufsphy_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl), + .rx_tbl = sdm845_ufsphy_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl), + .pcs_tbl = sdm845_ufsphy_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl), + .clk_list = sdm845_ufs_phy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = sdm845_ufsphy_regs_layout, + + .start_ctrl = SERDES_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PCS_READY, + .skip_sw_rst = true, +}; + static void qcom_qmp_phy_configure(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -1140,7 +1243,8 @@ static int qcom_qmp_phy_init(struct phy *phy) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); /* Pull PHY out of reset state */ - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (!cfg->skip_sw_rst) + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); if (cfg->has_phy_dp_com_ctrl) qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); @@ -1178,7 +1282,8 @@ static int qcom_qmp_phy_exit(struct phy *phy) clk_disable_unprepare(qphy->pipe_clk); /* PHY reset */ - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (!cfg->skip_sw_rst) + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); /* stop SerDes and Phy-Coding-Sublayer */qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); @@ -1531,6 +1636,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)}, { .compatible = "qcom,sdm845-qmp-usb3-uni-phy", .data = &qmp_v3_usb3_uniphy_cfg, + }, { + .compatible = "qcom,sdm845-qmp-ufs-phy", + .data = &sdm845_ufsphy_cfg, }, { }, };diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.hindex 5d78d43..3cbcfe1 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -184,6 +184,8 @@ #define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8 #define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc #define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100 +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104 +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108 #define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c #define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120 #define QSERDES_V3_COM_CLK_SELECT 0x138 @@ -211,8 +213,13 @@ /* Only for QMP V3 PHY - RX registers */ #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c #define QSERDES_V3_RX_UCDR_SO_GAIN 0x014 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c +#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044 #define QSERDES_V3_RX_RX_TERM_BW 0x07c #define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc #define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0 @@ -275,6 +282,7 @@ #define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0 #define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4 +#define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4 #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
