On Fri, 13 Apr 2018 13:36:46 -0300
Hernán Gonzalez <her...@vanguardiasur.com.ar> wrote:

> This allows the driver to be probed and removed as a module powering it
> down on remove().
> 
> Signed-off-by: Hernán Gonzalez <her...@vanguardiasur.com.ar>
> ---
>  drivers/staging/iio/cdc/ad7746.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/staging/iio/cdc/ad7746.c 
> b/drivers/staging/iio/cdc/ad7746.c
> index c29a221..05506bf9 100644
> --- a/drivers/staging/iio/cdc/ad7746.c
> +++ b/drivers/staging/iio/cdc/ad7746.c
> @@ -775,6 +775,31 @@ static int ad7746_probe(struct i2c_client *client,
>       return 0;
>  }
>  
> +static int ad7746_remove(struct i2c_client *client)
> +{
> +     struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +     struct ad7746_chip_info *chip = iio_priv(indio_dev);
> +     unsigned char regval;
> +     int ret;
> +
> +     mutex_lock(&chip->lock);
> +
> +     regval = chip->config | AD7746_CONF_MODE_PWRDN;
> +     ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
As this is a one off operation, perhaps it would be better to factor
it out to a utility function then use devm_add_action_or_reset in
the probe?

Also, I am nervous about this change as there doesn't seem to be
path in probe by which this is deliberately reversed?
It seems to be 'accidentally' handled by the read_raw write to the
CFG register.

The data sheet doesn't really mention much about this register
at all.  It may have special requirements to exit from power down - I have
no idea, but if it is costless, why do we bother with idle mode?

Perhaps Michael can confirm if this is safe to do or not.


> +
> +     mutex_unlock(&chip->lock);
> +
> +     if (ret < 0) {
> +             dev_warn(&client->dev, "Could NOT Power Down!\n");
> +             goto out;
> +     }
> +
> +     iio_device_unregister(indio_dev);
You can't safely do this against the devm_iio_device_register.

> +
> +out:
> +     return ret;
> +}
> +
>  static const struct i2c_device_id ad7746_id[] = {
>       { "ad7745", 7745 },
>       { "ad7746", 7746 },
> @@ -799,6 +824,7 @@ static struct i2c_driver ad7746_driver = {
>               .of_match_table = of_match_ptr(ad7746_of_match),
>       },
>       .probe = ad7746_probe,
> +     .remove = ad7746_remove,
>       .id_table = ad7746_id,
>  };
>  module_i2c_driver(ad7746_driver);

Reply via email to