On Tue, Apr 10, 2018 at 06:59:47PM -0700, Andrey Smirnov wrote:
> Add Device Tree bindings for RAVE SP EEPROM driver - an MFD cell of
> parent RAVE SP driver (documented in
> Documentation/devicetree/bindings/mfd/zii,rave-sp.txt).
>
> Cc: Srinivas Kandagatla <[email protected]>
> Cc: [email protected]
> Cc: Chris Healy <[email protected]>
> Cc: Lucas Stach <[email protected]>
> Cc: Aleksander Morgado <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: [email protected]
> Signed-off-by: Andrey Smirnov <[email protected]>
> ---
> .../bindings/nvmem/zii,rave-sp-eeprom.txt | 29
> ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
>
> diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
> b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
> new file mode 100644
> index 000000000000..a4e838c30b67
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
> @@ -0,0 +1,29 @@
> +Zodiac Inflight Innovations RAVE EEPROM Bindings
> +
> +RAVE SP EEPROM device is a "MFD cell" device exposing physical EEPROM
> +attached to RAVE Supervisory Processor. It is expected that its Device
> +Tree node is specified as a child of the node corresponding to the
> +parent RAVE SP device (as documented in
> +Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
> +
> +Required properties:
> +
> +- compatible: Should be "zii,rave-sp-eeprom"
Need to state somewhere this follows the bindings/nvmem/nvmem.txt
binding.
> +
> +Example:
> +
> + rave-sp {
> + compatible = "zii,rave-sp-rdu1";
> + current-speed = <38400>;
> +
> + main-eeprom {
eeprom@a4
> + compatible = "zii,rave-sp-eeprom";
> + reg = <0xA4 0x4000>;
lowercase hex please.
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + wdt_timeout: wdt-timeout@81 {
> + reg = <0x81 2>;
> + };
> + };
> + }
> --
> 2.14.3
>
