Quoting Amit Nischal (2018-04-03 06:22:41)
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index fbf4532..c961e89 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -218,6 +218,15 @@ config MSM_MMCC_8996
> Say Y if you want to support multimedia devices such as display,
> graphics, video encode/decode, camera, etc.
>
> +config SDM_GCC_845
> + tristate "SDM845 Global Clock Controller"
> + depends on COMMON_CLK_QCOM
> + help
> + Support for the global clock controller on Qualcomm Technologies,
> Inc
> + sdm845 devices.
> + Say Y if you want to use peripheral devices such as UART, SPI,
> + i2c, USB, UFS, SD/eMMC, PCIe, etc.
Is there eMMC?
> +
> config SPMI_PMIC_CLKDIV
> tristate "SPMI PMIC clkdiv Support"
> depends on (COMMON_CLK_QCOM && SPMI) || COMPILE_TEST
> diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
> new file mode 100644
> index 0000000..b1b7a1e
> --- /dev/null
> +++ b/drivers/clk/qcom/gcc-sdm845.c
> @@ -0,0 +1,3546 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/bitops.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/clk.h>
Is this include used?
> +#include <linux/clk-provider.h>
> +#include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> +
[...]
> +
> +static struct clk_rcg2 gcc_usb30_prim_mock_utmi_clk_src = {
> + .cmd_rcgr = 0xf030,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = gcc_parent_map_0,
> + .freq_tbl = ftbl_gcc_usb30_prim_mock_utmi_clk_src,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "gcc_usb30_prim_mock_utmi_clk_src",
> + .parent_names = gcc_parent_names_0,
> + .num_parents = 4,
> + .ops = &clk_rcg2_shared_ops,
Still shared? Why?
> +
> +static struct clk_branch gcc_video_ahb_clk = {
> + .halt_reg = 0xb004,
> + .halt_check = BRANCH_HALT,
> + .hwcg_reg = 0xb004,
> + .hwcg_bit = 1,
> + .clkr = {
> + .enable_reg = 0xb004,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_video_ahb_clk",
> + .flags = CLK_IS_CRITICAL,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +
Weird double space here.
> +static struct clk_branch gcc_video_xo_clk = {
> + .halt_reg = 0xb028,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0xb028,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_video_xo_clk",
> + .flags = CLK_IS_CRITICAL,
For these "critical" clks that don't have parents can you just throw the
enable part in the gcc driver probe and remove these clks from being
exposed? They don't seem to provide any value to expose them as clks
when they don't hook into the final clk tree.
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_vs_ctrl_ahb_clk = {
> + .halt_reg = 0x7a014,
> + .halt_check = BRANCH_HALT,
> + .hwcg_reg = 0x7a014,
> + .hwcg_bit = 1,
> + .clkr = {
> + .enable_reg = 0x7a014,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_vs_ctrl_ahb_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_vs_ctrl_clk = {
> + .halt_reg = 0x7a010,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x7a010,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_vs_ctrl_clk",
> + .parent_names = (const char *[]){
> + "gcc_vs_ctrl_clk_src",
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +
> +static int gcc_sdm845_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap;
> + int i, ret;
> +
> + regmap = qcom_cc_map(pdev, &gcc_sdm845_desc);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + for (i = 0; i < ARRAY_SIZE(gcc_sdm845_hws); i++) {
> + ret = devm_clk_hw_register(dev, gcc_sdm845_hws[i]);
> + if (ret)
> + return ret;
> + }
> +
> + /* Disable the GPLL0 active input to MMSS and GPU via MISC registers
> */
> + regmap_update_bits(regmap, 0x09ffc, 0x3, 0x3);
> + regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
I think we'll have to throw in the pipe clk branch stuff in here too?
And then drop the pipe clks from the driver?
> +
> + return qcom_cc_really_probe(pdev, &gcc_sdm845_desc, regmap);
> +}
> +
> diff --git a/include/dt-bindings/clock/qcom,gcc-sdm845.h
> b/include/dt-bindings/clock/qcom,gcc-sdm845.h
> new file mode 100644
> index 0000000..e27d8e2
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,gcc-sdm845.h
> @@ -0,0 +1,242 @@
[...]
> +#define GCC_VDDA_VS_CLK 180
> +#define GCC_VDDCX_VS_CLK 181
> +#define GCC_VDDMX_VS_CLK 182
> +#define GCC_VS_CTRL_AHB_CLK 183
> +#define GCC_VS_CTRL_CLK 184
> +#define GCC_VS_CTRL_CLK_SRC 185
> +#define GCC_VSENSOR_CLK_SRC 186
> +#define GPLL4 187
Do you have the define for the quad spi clks? And the implementation for
it?
> +
> +/* GCC reset clocks */
They're just resets, not reset clks.
> +#define GCC_MMSS_BCR 0
> +#define GCC_PCIE_0_BCR 1
> +#define GCC_PCIE_1_BCR 2
> +#define GCC_PCIE_PHY_BCR 3
> +#define GCC_PDM_BCR 4
> +#define GCC_PRNG_BCR 5
> +#define GCC_QUPV3_WRAPPER_0_BCR 6
> +#define GCC_QUPV3_WRAPPER_1_BCR 7
