Hello Chris,
On Fri, Apr 20, 2018 at 09:07:59AM +0800, Chris Ruehl wrote:
> Fix a problem introduced with
> commit e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI
> irqs to be off")
> result in non dte-mode imx-uart fail receive data.
> By add back IMX21_UCR3_RXDMUXSEL the serial port works as expected.
>
> Signed-off-by: Chris Ruehl <[email protected]>
> ---
> drivers/tty/serial/imx.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 91f3a1a..3d09933 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1391,7 +1391,7 @@ static int imx_uart_startup(struct uart_port *port)
>
> ucr3 = imx_uart_readl(sport, UCR3);
>
> - ucr3 |= UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
> + ucr3 |= IMX21_UCR3_RXDMUXSEL | UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
>
> if (sport->dte_mode)
> /* disable broken interrupts */
Doesn't 6df765dca378bddf994cfd2044acafa501bd800f fix this for you?
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
