On Wed, Apr 25, 2018 at 7:54 AM, Kishon Vijay Abraham I <[email protected]> wrote: > From: Hari Nagalla <[email protected]> > > The wilink module is a combo wireless connectivity sdio > card based on Texas Instrument's wl18xx solution. It is a > 4-wire, 1.8V, embedded sdio wlan device with an external > irq line and is power-controlled by a gpio-based fixed > regulator. > > Add pinmux configuration and IODelay values for MMC4. > On dra7-evm, MMC4 is used for connecting to wilink module. > > IODelay data credits to : Vishal Mahaveer <[email protected]> > and Sekhar Nori <[email protected]> > > Signed-off-by: Ido Yariv <[email protected]> > Signed-off-by: Eyal Reizer <[email protected]> > Signed-off-by: Hari Nagalla <[email protected]> > Signed-off-by: Sekhar Nori <[email protected]> > Signed-off-by: Kishon Vijay Abraham I <[email protected]> > --- > arch/arm/boot/dts/dra7-evm-common.dtsi | 15 +++++++++++++++ > arch/arm/boot/dts/dra7-evm.dts | 25 +++++++++++++++++++++++++ > 2 files changed, 40 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi > b/arch/arm/boot/dts/dra7-evm-common.dtsi > index 05a7b1a01bc3..3590c40fc112 100644 > --- a/arch/arm/boot/dts/dra7-evm-common.dtsi > +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi > @@ -260,3 +260,18 @@ > &pcie1_rc { > status = "okay"; > }; > + > +&mmc4 { > + bus-width = <4>; > + cap-power-off-card; > + keep-power-in-suspend; > + non-removable; > + #address-cells = <1>; > + #size-cells = <0>; > + wlcore: wlcore@2 {
wifi@2
