The IO lines of MMC2 in am57xx-beagle-x15/am57xx-idk is connected to 3.3v. Use "ddr_3_3v" instead of "ddr_1_8v" to indicate DDR mode works in 3.3v on these boards.
Signed-off-by: Kishon Vijay Abraham I <[email protected]> --- arch/arm/boot/dts/am571x-idk.dts | 2 +- arch/arm/boot/dts/am572x-idk.dts | 2 +- arch/arm/boot/dts/am574x-idk.dts | 2 +- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index f7de03eb4377..5bb9d68d6e90 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -113,7 +113,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 98b42ef33c46..3ef9111d0e8b 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -31,7 +31,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index c7718b2d9fdf..378dfa780ac1 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -35,7 +35,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_default>; pinctrl-2 = <&mmc2_pins_default>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index d6689106d2a8..c76ea6579a81 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -28,7 +28,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; -- 2.17.0
