On Thu, Apr 26, 2018 at 6:19 PM, Phil Edworthy <[email protected]> wrote:
> The DesignWare GPIO IP can be configured for either 1 interrupt or 1 > per GPIO in port A, but the driver currently only supports 1 interrupt. > See the DesignWare DW_apb_gpio Databook description of the > 'GPIO_INTR_IO' parameter. > > This change allows the driver to work with up to 32 interrupts, it will > get as many interrupts as specified in the DT 'interrupts' property. > It doesn't do anything clever with the different interrupts, it just calls > the same handler used for single interrupt hardware. > > ACPI companion code provided by Hoan Tran <[email protected]>. This was tested > on X-Gene by Hoan. > > Signed-off-by: Phil Edworthy <[email protected]> > Reviewed-by: Rob Herring <[email protected]> > Acked-by: Lee Jones <[email protected]> Patch applied for v4.18 with Hoan's ACK. Yours, Linus Walleij
