Hi Rob,

Thanks for the review.

On 27/04/18 22:00, Rob Herring wrote:
> On Tue, Apr 24, 2018 at 10:37:41AM +0200, Enric Balletbo i Serra wrote:
>> In ATF we already wait for DDR dvfs finish, so don't need to do this in
>> kernel, so remove the interrupts properties as is not longer required.
> 
> If the hardware has an interrupt, then the DT should have one. The 
> partitioning with ATF shouldn't matter.
> 
> Now, if you want to make ATF remove the interrupt, then maybe that is 
> okay. But it's not clear to me why you'd expose some of the h/w and not 
> all.
> 

Ok, sounds good if I move interrupts to be optional then?

Best regards,
 Enric

>>
>> Signed-off-by: Enric Balletbo i Serra <[email protected]>
>> Reviewed-by: Chanwoo Choi <[email protected]>
>> ---
>>
>> Changes in v2:
>> - [4/6] Add Reviewed-by Chanwoo Choi.
>>
>>  Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt | 5 -----
>>  1 file changed, 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt 
>> b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
>> index 834637c7bae7..e7f0ef9548b7 100644
>> --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
>> +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
>> @@ -5,10 +5,6 @@ Required properties:
>>  - devfreq-events:    Node to get DDR loading, Refer to
>>                       Documentation/devicetree/bindings/devfreq/event/
>>                       rockchip-dfi.txt
>> -- interrupts:                The CPU interrupt number. The interrupt 
>> specifier
>> -                     format depends on the interrupt controller.
>> -                     It should be a DCF interrupt. When DDR DVFS finishes
>> -                     a DCF interrupt is triggered.
>>  - clocks:            Phandles for clock specified in "clock-names" property
>>  - clock-names :              The name of clock used by the DFI, must be
>>                       "pclk_ddr_mon";
>> @@ -172,7 +168,6 @@ Example:
>>      dmc: dmc {
>>              compatible = "rockchip,rk3399-dmc";
>>              devfreq-events = <&dfi>;
>> -            interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>>              clocks = <&cru SCLK_DDRCLK>;
>>              clock-names = "dmc_clk";
>>              operating-points-v2 = <&dmc_opp_table>;
>> -- 
>> 2.17.0
>>

Reply via email to