On Thu, Apr 26, 2018 at 02:58:13PM +0800, Anson Huang wrote:
> Add pfuze100 support on i.MX6SX Sabre Auto board.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> no changes since V4.
> arch/arm/boot/dts/imx6sx-sabreauto.dts | 117
> +++++++++++++++++++++++++++++++++
> 1 file changed, 117 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> index 57d1ea0..2caca934 100644
> --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> @@ -74,6 +74,14 @@
>
> &iomuxc {
> imx6x-sabreauto {
> +
Drop this newline.
> + pinctrl_i2c2_1: i2c2grp-1 {
The suffix "1" doesn't make any sense now.
pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6SX_PAD_GPIO1_IO03__I2C2_SDA
> 0x4001b8b1
> + MX6SX_PAD_GPIO1_IO02__I2C2_SCL
> 0x4001b8b1
> + >;
> + };
> +
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
> @@ -148,3 +156,112 @@
> };
> };
> };
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2_1>;
> + status = "okay";
> +
> + pmic: pfuze100@08 {
Use generic name for node, and specific name for label. Also, drop the
leading zeros in unit-address.
pfuze100: pmic@8 {
Shawn
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3b_reg: sw3b {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-always-on;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> --
> 2.7.4
>
