From: Clément Péron <[email protected]> DebugFS strings about pin pull status for no_keeper SoC are wrong
Fix this by adding a different string array for no_keeper SoC Signed-off-by: Clément Péron <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> --- Hi Linus, Forwarding this patch which was posted to linux-arm-msm@ only. LGTM, please apply. @Clémen, please use ./scripts/get_maintaine.pl to find appropriate recipients for future patches. Regards, Bjorn drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index fa4e94fedb8c..c3c77b86eff7 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -504,13 +504,19 @@ static void msm_gpio_dbg_show_one(struct seq_file *s, int pull; u32 ctl_reg; - static const char * const pulls[] = { + static const char * const pulls_keeper[] = { "no pull", "pull down", "keeper", "pull up" }; + static const char * const pulls_no_keeper[] = { + "no pull", + "pull down", + "pull up", + }; + if (!gpiochip_line_is_valid(chip, offset)) return; @@ -524,7 +530,10 @@ static void msm_gpio_dbg_show_one(struct seq_file *s, seq_printf(s, " %-8s: %-3s %d", g->name, is_out ? "out" : "in", func); seq_printf(s, " %dmA", msm_regval_to_drive(drive)); - seq_printf(s, " %s", pulls[pull]); + if (pctrl->soc->pull_no_keeper) + seq_printf(s, " %s", pulls_no_keeper[pull]); + else + seq_printf(s, " %s", pulls_keeper[pull]); seq_puts(s, "\n"); } -- 2.17.0
