Hi Laurent, Archit, Andrzej & Yannick,
Do you have any comments on this v2 driver part?
(more details regarding v1/v2 differences in the cover letter
https://www.spinics.net/lists/dri-devel/msg174137.html)
Thank you,
Philippe :-)
On 04/25/2018 09:53 AM, Philippe Cornu wrote:
> Add the optional power supplies using the description found in
> "SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)".
>
> The sii902x input IOs are not "io safe" so it is important to
> enable/disable voltage regulators during probe/remove phases to
> avoid damages.
>
> Signed-off-by: Philippe Cornu <philippe.co...@st.com>
> ---
> drivers/gpu/drm/bridge/sii902x.c | 38 ++++++++++++++++++++++++++++++++++----
> 1 file changed, 34 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/sii902x.c
> b/drivers/gpu/drm/bridge/sii902x.c
> index 60373d7eb220..c367d7b91ade 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -24,6 +24,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>
> #include <drm/drmP.h>
> #include <drm/drm_atomic_helper.h>
> @@ -86,6 +87,7 @@ struct sii902x {
> struct drm_bridge bridge;
> struct drm_connector connector;
> struct gpio_desc *reset_gpio;
> + struct regulator_bulk_data supplies[2];
> };
>
> static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
> @@ -392,23 +394,42 @@ static int sii902x_probe(struct i2c_client *client,
> return PTR_ERR(sii902x->reset_gpio);
> }
>
> + sii902x->supplies[0].supply = "iovcc";
> + sii902x->supplies[1].supply = "vcc12";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(sii902x->supplies),
> + sii902x->supplies);
> + if (ret) {
> + dev_err(dev, "Failed to get power supplies: %d\n", ret);
> + return ret;
> + }
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(sii902x->supplies),
> + sii902x->supplies);
> + if (ret) {
> + dev_err(dev, "Failed to enable power supplies: %d\n", ret);
> + return ret;
> + }
> +
> + usleep_range(10000, 20000);
> +
> sii902x_reset(sii902x);
>
> ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
> if (ret)
> - return ret;
> + goto err_disable_regulator;
>
> ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
> &chipid, 4);
> if (ret) {
> dev_err(dev, "regmap_read failed %d\n", ret);
> - return ret;
> + goto err_disable_regulator;
> }
>
> if (chipid[0] != 0xb0) {
> dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
> chipid[0]);
> - return -EINVAL;
> + ret = -EINVAL;
> + goto err_disable_regulator;
> }
>
> /* Clear all pending interrupts */
> @@ -424,7 +445,7 @@ static int sii902x_probe(struct i2c_client *client,
> IRQF_ONESHOT, dev_name(dev),
> sii902x);
> if (ret)
> - return ret;
> + goto err_disable_regulator;
> }
>
> sii902x->bridge.funcs = &sii902x_bridge_funcs;
> @@ -434,6 +455,12 @@ static int sii902x_probe(struct i2c_client *client,
> i2c_set_clientdata(client, sii902x);
>
> return 0;
> +
> +err_disable_regulator:
> + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies),
> + sii902x->supplies);
> +
> + return ret;
> }
>
> static int sii902x_remove(struct i2c_client *client)
> @@ -443,6 +470,9 @@ static int sii902x_remove(struct i2c_client *client)
>
> drm_bridge_remove(&sii902x->bridge);
>
> + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies),
> + sii902x->supplies);
> +
> return 0;
> }
>
>
