Add enable/disable support for switch regulator on pfuze100. Based on Robin Gong's patch from the NXP kernel tree.
Signed-off-by: Anson Huang <[email protected]> --- drivers/regulator/pfuze100-regulator.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 680f076..053eb1e 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -155,6 +155,9 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = { }; static const struct regulator_ops pfuze100_sw_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_linear, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -200,6 +203,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { .uV_step = (step), \ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ .vsel_mask = 0x3f, \ + .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ + .enable_val = 0xc, \ + .disable_val = 0x0, \ + .enable_mask = 0xf, \ + .enable_time = 500, \ }, \ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ .stby_mask = 0x3f, \ -- 2.7.4
