Document the DT bindings for the SAW regulators.

The saw-leader is the only property that is configurable in DT.

The saw-slave property allows ganging (grouping) of
several regulators so that their outputs can be combined.

Signed-off-by: Ilia Lin <ilia...@codeaurora.org>
Reviewed-by: Rob Herring <r...@kernel.org>
---
 .../bindings/regulator/qcom,spmi-regulator.txt     | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git 
a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt 
b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 57d2c65..406f2e5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -110,6 +110,11 @@ Qualcomm SPMI Regulators
        Definition: Reference to regulator supplying the input pin, as
                    described in the data sheet.
 
+- qcom,saw-reg:
+       Usage: optional
+       Value type: <phandle>
+       Description: Reference to syscon node defining the SAW registers.
+
 
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
@@ -201,6 +206,17 @@ see regulator.txt - with additional custom properties 
described below:
                        2 = 0.55 uA
                        3 = 0.75 uA
 
+- qcom,saw-slave:
+       Usage: optional
+       Value type: <boo>
+       Description: SAW controlled gang slave. Will not be configured.
+
+- qcom,saw-leader:
+       Usage: optional
+       Value type: <boo>
+       Description: SAW controlled gang leader. Will be configured as
+                    SAW regulator.
+
 Example:
 
        regulators {
@@ -221,3 +237,32 @@ Example:
 
                ....
        };
+
+Example 2:
+
+       saw3: syscon@9A10000 {
+               compatible = "syscon";
+               reg = <0x9A10000 0x1000>;
+       };
+
+       ...
+
+       spm-regulators {
+               compatible = "qcom,pm8994-regulators";
+               qcom,saw-reg = <&saw3>;
+               s8 {
+                       qcom,saw-slave;
+               };
+               s9 {
+                       qcom,saw-slave;
+               };
+               s10 {
+                       qcom,saw-slave;
+               };
+               pm8994_s11_saw: s11 {
+                       qcom,saw-leader;
+                       regulator-always-on;
+                       regulator-min-microvolt = <900000>;
+                       regulator-max-microvolt = <1140000>;
+               };
+       };
-- 
1.9.1

Reply via email to