On certain versions of Broadcom PAXC based root complexes, certain
regions of the configuration space are corrupted. As a result, it
prevents the Linux PCIe stack from traversing the linked list of the
capability registers completely and therefore the root complex is
not advertised as "PCIe capable". This prevents the correct PCIe RID
from being parsed in the kernel PCIe stack. A correct RID is required
for mapping to a stream ID from the SMMU or the device ID from the
GICv3 ITS
This patch fixes up the issue by manually populating the related
PCIe capabilities based on readings from the PCIe capability structure
Signed-off-by: Ray Jui <r...@broadcom.com>
Reviewed-by: Anup Patel <anup.pa...@broadcom.com>
Reviewed-by: Scott Branden <scott.bran...@broadcom.com>
---
drivers/pci/quirks.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 47dfea0..0cdbd0a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2198,6 +2198,101 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
quirk_paxc_bridge);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
+
+/*
+ * The PCI capabilities list for certain revisions of Broadcom PAXC root
+ * complexes is incorrectly terminated due to corrupted configuration space
+ * registers in the range of 0x50 - 0x5f
+ *
+ * As a result, the capability list becomes broken and prevent standard PCI
+ * stack from being able to traverse to the PCIe capability structure
+ */
+static void quirk_paxc_pcie_capability(struct pci_dev *pdev)
+{
+ int pos, i = 0;
+ u8 next_cap;
+ u16 reg16, *cap;
+ struct pci_cap_saved_state *state;
+
+ /* bail out if PCIe capability can be found */
+ if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP))
+ return;
+
+ /* locate the power management capability */
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (!pos)
+ return;
+
+ /* bail out if the next capability pointer is not 0x50/0x58 */
+ pci_read_config_byte(pdev, pos + 1, &next_cap);
+ if (next_cap != 0x50 && next_cap != 0x58)
+ return;
+
+ /* bail out if we do not terminate at 0x50/0x58 */
+ pos = next_cap;
+ pci_read_config_byte(pdev, pos + 1, &next_cap);
+ if (next_cap != 0x00)
+ return;
+
+ /*
+ * On these buggy HW, PCIe capability structure is expected to be at
+ * 0xac and should terminate the list
+ *
+ * Borrow the similar logic from theIntel DH895xCC VFs fixup to save
+ * the PCIe capability list
+ */
+ pos = 0xac;
+ pci_read_config_word(pdev, pos, ®16);
+ if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) {
+ u32 status;
+
+#ifndef PCI_EXP_SAVE_REGS
+#define PCI_EXP_SAVE_REGS 7
+#endif
+ int size = PCI_EXP_SAVE_REGS * sizeof(u16);
+
+ pdev->pcie_cap = pos;
+ pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
+ pdev->pcie_flags_reg = reg16;
+ pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
+ pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
+
+ pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
+ if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) !=
+ PCIBIOS_SUCCESSFUL || (status == 0xffffffff))
+ pdev->cfg_size = PCI_CFG_SPACE_SIZE;
+
+ if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP))
+ return;
+
+ state = kzalloc(sizeof(*state) + size, GFP_KERNEL);
+ if (!state)
+ return;
+
+ state->cap.cap_nr = PCI_CAP_ID_EXP;
+ state->cap.cap_extended = 0;
+ state->cap.size = size;
+ cap = (u16 *)&state->cap.data[0];
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]);
+ hlist_add_head(&state->next, &pdev->saved_cap_space);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_57810,
+ quirk_paxc_pcie_capability);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd,
+ quirk_paxc_pcie_capability);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
+ quirk_paxc_pcie_capability);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
+ quirk_paxc_pcie_capability);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
+ quirk_paxc_pcie_capability);
#endif
/* Originally in EDAC sources for i82875P:
--
2.1.4
