From: Levin Du <d...@t-chip.com.cn>
Adding a new gpio controller named "gpio-mute" to rk3328, providing
access to the GPIO_MUTE pin defined in the syscon GRF_SOC_CON10.
The GPIO_MUTE pin is referred to as <&gpio-mute 1>.
Signed-off-by: Levin Du <d...@t-chip.com.cn>
---
Changes in v2:
- Rename gpio_syscon10 to gpio_mute in rk3328.dtsi
Changes in v1:
- Split from V0 and add to rk3328.dtsi for general use.
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index b8e9da1..5ba29d3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -309,6 +309,13 @@
mode-loader = <BOOT_BL_DOWNLOAD>;
};
+ /* The GPIO_MUTE pin is referred to as <&gpio-mute 1>.*/
+ gpio_mute: gpio-mute {
+ compatible = "rockchip,gpio-syscon";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <0 0x0428 0>;
+ };
};
uart0: serial@ff110000 {
--
2.7.4
