Some i.MX SoCs have GPIO clock gates in CCM CCGR, such as
i.MX6SLL, need to enable clocks before accessing GPIO
registers, add optional clock operation for GPIO driver.
Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
changes since V2:
remove the copyright change, since the change is already done by
Fabio's patch [1/2] gpio: mxc: Switch to SPDX identifier, I redo
the patch on top of it.
drivers/gpio/gpio-mxc.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 6a9dc61..2f28299 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -7,6 +7,7 @@
// Authors: Daniel Mack, Juergen Beisert.
// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -47,6 +48,7 @@ struct mxc_gpio_hwdata {
struct mxc_gpio_port {
struct list_head node;
void __iomem *base;
+ struct clk *clk;
int irq;
int irq_high;
struct irq_domain *domain;
@@ -421,6 +423,17 @@ static int mxc_gpio_probe(struct platform_device *pdev)
if (port->irq < 0)
return port->irq;
+ /* the controller clock is optional */
+ port->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(port->clk))
+ port->clk = NULL;
+
+ err = clk_prepare_enable(port->clk);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return err;
+ }
+
/* disable the interrupt and clear the status */
writel(0, port->base + GPIO_IMR);
writel(~0, port->base + GPIO_ISR);
@@ -489,6 +502,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
out_irqdomain_remove:
irq_domain_remove(port->domain);
out_bgio:
+ clk_disable_unprepare(port->clk);
dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
return err;
}
--
2.7.4
