From: Clément Peron <clement.pe...@devialet.com>
Add devicetree binding document for NXP's i.MX SoC specific
EPIT timer driver.
Signed-off-by: Clément Peron <clement.pe...@devialet.com>
---
.../devicetree/bindings/clock/imx6q,epit.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/imx6q,epit.txt
diff --git a/Documentation/devicetree/bindings/clock/imx6q,epit.txt
b/Documentation/devicetree/bindings/clock/imx6q,epit.txt
new file mode 100644
index 000000000000..d54d455cebdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q,epit.txt
@@ -0,0 +1,25 @@
+Binding for the i.MX6 EPIT timer
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "fsl,imx6q-epit"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Should contain EPIT controller interrupt
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names : as described in the clock bindings
+
+Example:
+ epit1: epit@20d0000 {
+ compatible = "fsl,imx6q-epit";
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_EPIT1>,
+ <&clks IMX6QDL_CLK_IPG_PER>,
+ <&clks IMX6QDL_CLK_CKIL>;
+ clock-names = "ipg", "per", "ckil";
+ };
--
2.17.0
