On Sun, May 27, 2018 at 05:34:45PM +0200, Greg Kroah-Hartman wrote: > On Sun, May 27, 2018 at 03:22:06PM +0000, Vadim Pasternak wrote: > > > > > > > -----Original Message----- > > > From: Greg KH [mailto:[email protected]] > > > Sent: Sunday, May 27, 2018 6:14 PM > > > To: Vadim Pasternak <[email protected]> > > > Cc: [email protected]; [email protected]; linux- > > > [email protected]; [email protected]; > > > [email protected]; > > > Michael Shych <[email protected]>; [email protected] > > > Subject: Re: [PATCH v3 6/7] platform/mellanox: Introduce support for > > > Mellanox > > > register access driver > > > > > > On Sun, May 27, 2018 at 04:47:43PM +0000, Vadim Pasternak wrote: > > > > Introduce new Mellanox platform driver to allow access to Mellanox > > > > programmable device register space trough sysfs interface. > > > > The driver purpose is to provide sysfs interface for user space for > > > > the registers essential for system control and monitoring. > > > > The sets of registers for sysfs access are supposed to be defined per > > > > system type bases and include the registers related to system resets > > > > operation, system reset causes monitoring and some kinds of mux > > > > selection. > > > > > > > > Signed-off-by: Vadim Pasternak <[email protected]> > > > > --- > > > > v1->v2: > > > > Changed added by Vadim: > > > > - Change ---help--- to help in Kconfig, according to new > > > > requirements; > > > > v2->v3: > > > > Comments pointed out by Darren: > > > > - Remove conditional assignment per attribute mode type, because mode > > > > will guard against not permitted access. > > > > Verified by Vadim. > > > > --- > > > > drivers/platform/mellanox/Kconfig | 11 ++ > > > > drivers/platform/mellanox/Makefile | 1 + > > > > drivers/platform/mellanox/mlxreg-io.c | 203 > > > > ++++++++++++++++++++++++++++++++++ > > > > 3 files changed, 215 insertions(+) > > > > create mode 100644 drivers/platform/mellanox/mlxreg-io.c > > > > > > > > diff --git a/drivers/platform/mellanox/Kconfig > > > > b/drivers/platform/mellanox/Kconfig > > > > index 591bccd..ddfae9fc 100644 > > > > --- a/drivers/platform/mellanox/Kconfig > > > > +++ b/drivers/platform/mellanox/Kconfig > > > > @@ -23,4 +23,15 @@ config MLXREG_HOTPLUG > > > > This driver handles hot-plug events for the power suppliers, > > > > power > > > > cables and fans on the wide range Mellanox IB and Ethernet > > > > systems. > > > > > > > > +config MLXREG_IO > > > > + tristate "Mellanox platform register access driver support" > > > > + depends on REGMAP > > > > + depends on HWMON > > > > + help > > > > + This driver allows access to Mellanox programmable device > > > > register > > > > + space trough sysfs interface. The sets of registers for sysfs > > > > access > > > > + are defined per system type bases and includes the registers > > > > related > > > > + to system resets operation, system reset causes monitoring > > > > and some > > > > + kinds of mux selection. > > > > > > No Documentation/ABI/ entries for these new sysfs files? Not good :( > > > > > > > Thanks Greg for your comment. > > > > Should I call doc file like: > > Documentation/ABI/stable/sysfs-driver-mlxreg-io > > ? > > What ever matches the naming scheme for the driver, yes.
Vadim, I'm happy to help out with the docs if you like. Will you be able to document this in a static way, or is this likely to change significantly from platform to platform? I ask because of the automated attribute creation in the code. -- Darren Hart VMware Open Source Technology Center
