[PATCH 2/3] ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensor

[Jagan Teki]

OV5640 Camera sensor is connected in i.CoreM6 1.5 Quad/Dual MIPI
starter kit.

This patch also move MX6QDL_PAD_GPIO_0__CCM_CLKO1 pinctrl
from i2c3 to ov5640 pinctrl.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
 arch/arm/boot/dts/imx6q-icore-mipi.dts |  8 ++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi   | 46 +++++++++++++++++++++++++++++++++-
 2 files changed, 53 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts 
b/arch/arm/boot/dts/imx6q-icore-mipi.dts
index acd3d33476d4..95b2efda17b4 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -20,6 +20,14 @@
        status = "okay";
 };
 
+&mipi_csi {
+       status = "okay";
+};
+
+&ov5640 {
+       status = "okay";
+};
+
 &usdhc3 {
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi 
b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 0a1574998fc6..be8aa55c973e 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -215,6 +215,29 @@
        pinctrl-0 = <&pinctrl_i2c3>;
        status = "okay";
 
+       ov5640: camera@3c {
+               compatible = "ovti,ov5640";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_ov5640>;
+               reg = <0x3c>;
+               clocks = <&clks IMX6QDL_CLK_CKO>;
+               clock-names = "xclk";
+               DOVDD-supply = <&reg_1p8v>;
+               AVDD-supply = <&reg_3p3v>;
+               DVDD-supply = <&reg_3p3v>;
+               powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+               status = "disabled";
+
+               port {
+                       ov5640_to_mipi_csi2: endpoint {
+                               remote-endpoint = <&mipi_csi2_in>;
+                               clock-lanes = <0>;
+                               data-lanes = <1 2>;
+                       };
+               };
+       };
+
        sgtl5000: codec@a {
                #sound-dai-cells = <0>;
                compatible = "fsl,sgtl5000";
@@ -226,6 +249,20 @@
        };
 };
 
+&mipi_csi {
+       status = "disabled";
+
+       port@0 {
+               reg = <0>;
+
+               mipi_csi2_in: endpoint {
+                       remote-endpoint = <&ov5640_to_mipi_csi2>;
+                       clock-lanes = <0>;
+                       data-lanes = <1 2>;
+               };
+       };
+};
+
 &pwm3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm3>;
@@ -353,7 +390,14 @@
                fsl,pins = <
                        MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
                        MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-                       MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+               >;
+       };
+
+       pinctrl_ov5640: ov5640grp {
+               fsl,pins = <
+                       MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+                       MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+                       MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x130b0
                >;
        };
 
-- 
2.14.3