Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for
Broadcom NS2 SoC

Fixes: 7ac674e8df7a ("arm64: dts: Add I2C nodes for NS2")
Fixes: 63a913c157f5 ("arm64: dts: move ns2 into northstar2 directory")

Signed-off-by: Ray Jui <ray....@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi 
b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 4a2a6af..c0e4896 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -566,7 +566,7 @@
                        reg = <0x66080000 0x100>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
+                       interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <100000>;
                        status = "disabled";
                };
@@ -594,7 +594,7 @@
                        reg = <0x660b0000 0x100>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
+                       interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <100000>;
                        status = "disabled";
                };
-- 
2.1.4

Reply via email to