early console in setup code
early console in extract_kernel
input_data: 0x01b25069
input_len: 0x009da603
output: 0x01000000
output_len: 0x01280588
kernel_total_size: 0x01516000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.17.0-rc5-00204-g0dd4eca (kbuild@lkp-hsx03) (gcc version 6.4.0 20171026 (Debian 6.4.0-9)) #54 SMP PREEMPT Thu Jun 7 22:04:57 CST 2018
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffe0000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xffe0 max_arch_pfn = 0x100000
[    0.000000] MTRR: Disabled
[    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6aa0-0x000f6aaf] mapped at [(ptrval)]
[    0.000000]   mpc: f6ab0-f6b80
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x027fffff]
[    0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[    0.000000] BRK [0x023fb000, 0x023fbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x0fba3000-0x0ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F68D0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000000FFE15CE 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000000FFE142A 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000000FFE0040 0013EA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000000FFE0000 000040
[    0.000000] ACPI: APIC 0x000000000FFE151E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000000FFE1596 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 255MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0ffe0000
[    0.000000]   low ram: 0 - 0ffe0000
[    0.000000] kvm-clock: cpu 0, msr 0:fba1001, primary cpu clock
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 1036196896 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] BRK [0x023fc000, 0x023fcfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000ffdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffdffff]
[    0.000000] On node 0 totalpages: 65406
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 480 pages used for memmap
[    0.000000]   Normal zone: 61408 pages, LIFO batch:15
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x7a/0x4c5 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 26 pages/cpu @(ptrval) s82796 r0 d23700 u106496
[    0.000000] pcpu-alloc: s82796 r0 d23700 u106496 alloc=26*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr f98f7c0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64894
[    0.000000] Kernel command line: ip=::::vm-lkp-hsw-4ep1-openwrt-i386-11::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-hsw-4ep1-openwrt-i386-11/trinity-300s-openwrt-i386-2016-03-16.cgz-0dd4eca846629b5dc7d11ca40ae2a1379334b9e4-20180607-25215-1dmo68q-0.yaml ARCH=i386 kconfig=i386-randconfig-s0-201822 branch=dhowells-fs/mount-context commit=0dd4eca846629b5dc7d11ca40ae2a1379334b9e4 BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201822/gcc-6/0dd4eca846629b5dc7d11ca40ae2a1379334b9e4/vmlinuz-4.17.0-rc5-00204-g0dd4eca max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw-4ep1-openwrt-i386/openwrt-i386-2016-03-16.cgz/i386-randconfig-s0-201822/gcc-6/0dd4eca846629b5dc7d11ca40ae2a1379334b9e4/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] BRK [0x023fd000, 0x023fdfff] PGTABLE
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 110120K/261624K available (12060K kernel code, 1610K rwdata, 4176K rodata, 976K init, 1476K bss, 27260K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd37000 - 0xfffff000   (2848 kB)
[    0.000000]   cpu_entry : 0xff400000 - 0xff8e1000   (4996 kB)
[    0.000000]     pkmap   : 0xff000000 - 0xff400000   (4096 kB)
[    0.000000]     vmalloc : 0xd07e0000 - 0xfeffe000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xcffe0000   ( 255 MB)
[    0.000000]       .init : 0xc2184000 - 0xc2278000   ( 976 kB)
[    0.000000]       .data : 0xc1bc711a - 0xc216f8e0   (5793 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1bc711a   (12060 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] random: get_random_u32 called from cache_alloc_refill+0x42f/0x9a0 with crng_init=0
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.003333] Preemptible hierarchical RCU implementation.
[    0.003333] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.003333] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.003333] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.003333] 	RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[    0.003333] 	Tasks RCU enabled.
[    0.003333] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.003333] NR_IRQS: 2304, nr_irqs: 48, preallocated irqs: 16
[    0.003333] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.003333] 	Offload RCU callbacks from CPUs: (none).
[    0.003333] random: get_random_u32 called from cache_random_seq_create+0x67/0x100 with crng_init=0
[    0.003333] Console: colour VGA+ 80x25
[    0.003333] console [tty0] enabled
[    0.003333] console [ttyS0] enabled
[    0.003333] console [ttyS0] enabled
[    0.003333] bootconsole [earlyser0] disabled
[    0.003333] bootconsole [earlyser0] disabled
[    0.003333] ACPI: Core revision 20180313
[    0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.003333] hpet clockevent registered
[    0.003424] APIC: Switch to symmetric I/O mode setup
[    0.006697] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.008054] enabled ExtINT on CPU#0
[    0.010729] ENABLING IO-APIC IRQs
[    0.011609] init IO_APIC IRQs
[    0.012378]  apic 0 pin 0 not connected
[    0.013478] IOAPIC[0]: Set routing entry (0-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.015403] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-5 -> 0xef -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-9 -> 0xef -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-10 -> 0xef -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-11 -> 0xef -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.016666] IOAPIC[0]: Set routing entry (0-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.016666]  apic 0 pin 16 not connected
[    0.016666]  apic 0 pin 17 not connected
[    0.016666]  apic 0 pin 18 not connected
[    0.016666]  apic 0 pin 19 not connected
[    0.016666]  apic 0 pin 20 not connected
[    0.016666]  apic 0 pin 21 not connected
[    0.016666]  apic 0 pin 22 not connected
[    0.016666]  apic 0 pin 23 not connected
[    0.016666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Detected 1999.998 MHz processor
[    0.016811] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8595ce59, max_idle_ns: 881590778713 ns
[    0.020055] Calibrating delay loop (skipped) preset value.. 4001.66 BogoMIPS (lpj=6666660)
[    0.023376] pid_max: default: 32768 minimum: 301
[    0.027121] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.029999] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.038243] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.040021] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.041929] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[    0.043349] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.076976] Freeing SMP alternatives memory: 28K
[    0.083239] Using local APIC timer interrupts.
[    0.083239] calibrating APIC timer ...
[    0.086666] ... lapic delta = 6264966
[    0.086666] ... PM-Timer delta = 358814
[    0.086666] ... PM-Timer result ok
[    0.086666] ..... delta 6264966
[    0.086666] ..... mult: 269078267
[    0.086666] ..... calibration result: 3341315
[    0.086666] ..... CPU clock speed is 2004.3328 MHz.
[    0.086666] ..... host bus clock speed is 1002.1649 MHz.
[    0.087078] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.106746] Performance Events: PMU not available due to virtualization, using software events only.
[    0.120101] Hierarchical SRCU implementation.
[    0.133381] smp: Bringing up secondary CPUs ...
[    0.135768] smp: Brought up 1 node, 1 CPU
[    0.136700] smpboot: Max logical packages: 1
[    0.138412] smpboot: Total of 1 processors activated (4001.66 BogoMIPS)
[    0.143409] node 0 initialised, 31061 pages in 3ms
[    0.150663] devtmpfs: initialized
[    0.164749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.166785] futex hash table entries: 256 (order: 1, 8192 bytes)
[    0.170369] prandom: seed boundary self test passed
[    0.175129] prandom: 100 self tests passed
[    0.176691] pinctrl core: initialized pinctrl subsystem
[    0.181525] RTC time: 22:06:40, date: 06/07/18
[    0.184006] NET: Registered protocol family 16
[    0.192865] EISA bus registered
[    0.196757] cpuidle: using governor menu
[    0.203453] ACPI: bus type PCI registered
[    0.207755] PCI: PCI BIOS revision 2.10 entry at 0xfd501, last bus=0
[    0.210036] PCI: Using configuration type 1 for base access
[    0.256803] cryptd: max_cpu_qlen set to 1000
[    0.263874] ACPI: Added _OSI(Module Device)
[    0.266187] ACPI: Added _OSI(Processor Device)
[    0.266714] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.270026] ACPI: Added _OSI(Processor Aggregator Device)
[    0.272220] ACPI: Added _OSI(Linux-Dell-Video)
[    0.277801] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.288095] ACPI: Interpreter enabled
[    0.290108] ACPI: (supports S0 S3 S5)
[    0.293348] ACPI: Using IOAPIC for interrupt routing
[    0.296871] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.300630] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.321700] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.323425] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.326695] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.329245] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.330394] PCI host bridge to bus 0000:00
[    0.333364] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.336164] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.336690] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.340017] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window]
[    0.343369] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.347091] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.351810] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.355054] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.377707] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.386761] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.389655] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.390029] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.393356] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.400557] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.404303] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.406703] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.411046] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.420113] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.440044] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.476760] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.481473] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.486690] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.493355] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.515088] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.517895] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.521627] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.538192] pci_bus 0000:00: on NUMA node 0
[    0.549450] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.550852] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.553717] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.555939] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.556817] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.562534] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.563333] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.563349] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.565248] vgaarb: loaded
[    0.567729] ACPI: bus type USB registered
[    0.570196] usbcore: registered new interface driver usbfs
[    0.573779] usbcore: registered new interface driver hub
[    0.575774] usbcore: registered new device driver usb
[    0.577013] media: Linux media interface: v0.10
[    0.580098] Linux video capture interface: v2.00
[    0.583416] pps_core: LinuxPPS API ver. 1 registered
[    0.584743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.586695] PTP clock support registered
[    0.587824] EDAC MC: Ver: 3.0.0
[    0.590587] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[    0.600283] FPGA manager framework
[    0.602193] Advanced Linux Sound Architecture Driver Initialized.
[    0.603397] PCI: Using ACPI for IRQ routing
[    0.604717] PCI: pci_cache_line_size set to 32 bytes
[    0.606914] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.608786] e820: reserve RAM buffer [mem 0x0ffe0000-0x0fffffff]
[    0.615768] clocksource: Switched to clocksource kvm-clock
[    0.625192] Warning: could not register annotated branches stats
[    0.694063] VFS: Disk quotas dquot_6.6.0
[    0.695669] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.698082] FS-Cache: Loaded
[    0.699467] CacheFiles: Loaded
[    0.700715] pnp: PnP ACPI init
[    0.702215] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.703962] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.705596] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.707208] pnp 00:03: [dma 2]
[    0.708082] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.710099] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.711866] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.713585] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.716370] pnp: PnP ACPI: found 7 devices
[    1.040775] _warn_unseeded_randomness: 106 callbacks suppressed
[    1.040921] random: get_random_u32 called from copy_process+0x11e/0x1770 with crng_init=0
[    1.249418] mdacon: MDA with 8K of memory detected.
[    1.249860] random: get_random_u32 called from cache_alloc_refill+0x42f/0x9a0 with crng_init=0
[    1.250396] Console: switching consoles 13-16 to MDA-2
[    1.300451] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.305924] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.308457] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.311355] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.313861] pci_bus 0000:00: resource 7 [mem 0x10000000-0xfebfffff window]
[    1.317092] random: get_random_u32 called from cache_random_seq_create+0x67/0x100 with crng_init=0
[    1.321408] NET: Registered protocol family 2
[    1.324680] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.328144] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.330972] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    1.333633] TCP: Hash tables configured (established 2048 bind 2048)
[    1.336612] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.338907] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.341781] NET: Registered protocol family 1
[    1.363915] RPC: Registered named UNIX socket transport module.
[    1.366535] RPC: Registered udp transport module.
[    1.368494] RPC: Registered tcp transport module.
[    1.370504] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.373308] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.376672] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.379002] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.381512] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.384937] PCI: CLS 0 bytes, default 32
[    1.388101] Unpacking initramfs...
[    2.617383] Freeing initrd memory: 4340K
[    2.625581] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    2.627666] apm: overridden by ACPI.
[    2.629088] Scanning for low memory corruption every 60 seconds
[    2.631709] _warn_unseeded_randomness: 23 callbacks suppressed
[    2.631798] random: get_random_u32 called from copy_process+0x11e/0x1770 with crng_init=0
[    2.635767] random: get_random_u32 called from cache_alloc_refill+0x42f/0x9a0 with crng_init=0
[    2.637779] random: get_random_u32 called from copy_process+0x11e/0x1770 with crng_init=0
[    2.641122] PCLMULQDQ-NI instructions are not detected.
[    2.642352] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[    2.646821] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    2.653617] NFS: Registering the id_resolver key type
[    2.655045] Key type id_resolver registered
[    2.656063] Key type id_legacy registered
[    2.705045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.708798] io scheduler noop registered
[    2.710642] io scheduler deadline registered
[    2.712417] io scheduler cfq registered (default)
[    2.714307] io scheduler mq-deadline registered
[    2.716445] io scheduler bfq registered
[    2.723145] test_hexdump: all 1184 tests passed
[    2.725084] 
[    2.725084] Start testing find_bit() with random-filled bitmap
[    2.736129] find_next_bit:                 5707497 ns, 163669 iterations
[    2.744841] find_next_zero_bit:            5815827 ns, 164012 iterations
[    2.750563] find_last_bit:                 3251563 ns, 163670 iterations
[    2.773051] find_first_bit:               20035995 ns,  16234 iterations
[    2.779914] find_next_and_bit:		6138926 cycles, 73518 iterations
[    2.782909] 
[    2.782909] Start testing find_bit() with sparse bitmap
[    2.786360] find_next_bit:                   61036 ns,    656 iterations
[    2.800842] find_next_zero_bit:           11485006 ns, 327025 iterations
[    2.806904] find_last_bit:                   49904 ns,    656 iterations
[    2.817552] find_first_bit:                7324784 ns,    656 iterations
[    2.820812] find_next_and_bit:		659940 cycles, 1 iterations
[    2.823912] test_firmware: interface ready
[    2.846709] test_hash: __hash_32() has no arch implementation to test.
[    2.848444] test_hash: hash_32() has no arch implementation to test.
[    2.853371] test_hash: hash_64() has no arch implementation to test.
[    2.854909] test_hash: 33152 tests passed.
[    2.856015] test_siphash: self-tests: pass
[    2.856993] test_uuid: all 18 tests passed
[    2.861452] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
[    2.862826] crc32: self tests passed, processed 225944 bytes in 1617771 nsec
[    2.865967] crc32c: CRC_LE_BITS = 8
[    2.866824] crc32c: self tests passed, processed 225944 bytes in 793537 nsec
[    2.965465] crc32_combine: 8373 self tests passed
[    3.085091] crc32c_combine: 8373 self tests passed
[    3.117910] xz_dec_test: module loaded
[    3.119007] xz_dec_test: Create a device node with 'mknod xz_dec_test c 246 0' and write .xz files to it.
[    3.121994] atomic64_test: passed for i386+ platform with CX8 and with SSE
[    3.123668] glob: 64 self-tests passed, 0 failed
[    3.125554] gpio_it87: no device
[    3.127170] gpio_winbond: chip ID at 2e is ffff
[    3.128265] gpio_winbond: not an our chip
[    3.129267] gpio_winbond: chip ID at 4e is ffff
[    3.130369] gpio_winbond: not an our chip
[    3.131929] Console: switching consoles 13-16 to MDA-2
[    3.134037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.136543] ACPI: Power Button [PWRF]
[    3.143545] isapnp: Scanning for PnP cards...
[    3.523873] isapnp: No Plug & Play device found
[    3.528351] HDLC line discipline maxframe=4096
[    3.529568] N_HDLC line discipline registered.
[    3.530634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.571237] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.610090] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.621263] Cyclades driver 2.6
[    3.627449] tsc: Refined TSC clocksource calibration: 1999.998 MHz
[    3.628876] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8595ce59, max_idle_ns: 881590778713 ns
[    3.646523] MOXA Smartio/Industio family driver version 2.0.5
[    3.648075] RocketPort device driver module, version 2.09, 12-June-2003
[    3.649514] No rocketport ports found; unloading driver
[    3.653800] Non-volatile memory driver v1.3
[    3.654882] toshiba: not a supported Toshiba laptop
[    3.656944] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    3.658627] platform pc8736x_gpio.0: no device found
[    3.660223] nsc_gpio initializing
[    3.661090] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    3.662372] smapi::smapi_init, ERROR invalid usSmapiID
[    3.663908] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    3.666119] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    3.667855] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    3.669279] SyncLink PC Card driver $Revision: 4.34 $, tty major#244
[    3.670795] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    3.673418] _warn_unseeded_randomness: 637 callbacks suppressed
[    3.673443] random: get_random_u32 called from copy_process+0x11e/0x1770 with crng_init=0
[    3.683635] parport_pc 00:04: reported by Plug and Play ACPI
[    3.685208] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.785706] random: get_random_u32 called from cache_alloc_refill+0x42f/0x9a0 with crng_init=0
[    3.790769] dummy-irq: no IRQ given.  Use irq=N
[    3.793625] random: get_random_u32 called from cache_random_seq_create+0x67/0x100 with crng_init=0
[    3.809901] lkdtm: No crash points registered, enable through debugfs
[    3.813589] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    3.817848] usbcore: registered new interface driver rtsx_usb
[    3.822272] usbcore: registered new interface driver viperboard
[    3.825549] usbcore: registered new interface driver dln2
[    3.829899] Uniform Multi-Platform E-IDE driver
[    3.834948] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    3.852317] SSFDC read-only Flash Translation layer
[    3.860172] mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.866865] platform physmap-flash.0: failed to claim resource 0: [mem 0x08000000-0x07ffffff]
[    3.871446] slram: not enough parameters.
[    3.906082] No valid DiskOnChip devices found
[    4.039020] parport0: AVR Butterfly
[    4.042927] HSI/SSI char device loaded
[    4.044646] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.046384] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.183081] PCI Interrupt Link [LNKC] enabled at IRQ 11
[    4.620854] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    4.625403] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.628327] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.631045] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.633855] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    4.637945] igb: Copyright (c) 2007-2014 Intel Corporation.
[    4.640486] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[    4.643869] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    4.655382] panel: could not claim access to parport0. Aborting.
[    4.660370] panel: panel driver not yet registered
[    4.664324] Intel ISA PCIC probe: 
[    4.664780] not found.
[    4.669011] Databook TCIC-2 PCMCIA probe: 
[    4.669092] not found.
[    4.675822] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.679912] ohci-pci: OHCI PCI platform driver
[    4.682837] _warn_unseeded_randomness: 8 callbacks suppressed
[    4.682986] random: get_random_u32 called from cache_alloc_refill+0x42f/0x9a0 with crng_init=0
[    4.691319] ohci-platform: OHCI generic platform driver
[    4.693506] usbcore: registered new interface driver cdc_acm
[    4.695472] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    4.697693] usbcore: registered new interface driver usblp
[    4.699261] usbcore: registered new interface driver cdc_wdm
[    4.700956] usbcore: registered new interface driver mdc800
[    4.702599] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    4.705665] usbcore: registered new interface driver usbserial_generic
[    4.708738] usbserial: USB Serial support registered for generic
[    4.710092] usbcore: registered new interface driver aircable
[    4.712443] usbserial: USB Serial support registered for aircable
[    4.714113] usbcore: registered new interface driver ark3116
[    4.715865] usbserial: USB Serial support registered for ark3116
[    4.717456] usbcore: registered new interface driver belkin_sa
[    4.719135] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    4.721496] usbcore: registered new interface driver cyberjack
[    4.723545] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[    4.725804] usbcore: registered new interface driver cypress_m8
[    4.727797] usbserial: USB Serial support registered for DeLorme Earthmate USB
[    4.730204] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[    4.732440] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[    4.734337] usbcore: registered new interface driver usb_debug
[    4.737032] usbserial: USB Serial support registered for debug
[    4.738983] usbserial: USB Serial support registered for xhci_dbc
[    4.742461] usbcore: registered new interface driver digi_acceleport
[    4.744236] usbserial: USB Serial support registered for Digi 2 port USB adapter
[    4.746410] usbserial: USB Serial support registered for Digi 4 port USB adapter
[    4.750121] usbcore: registered new interface driver io_edgeport
[    4.751847] usbserial: USB Serial support registered for Edgeport 2 port adapter
[    4.753919] usbserial: USB Serial support registered for Edgeport 4 port adapter
[    4.756236] usbserial: USB Serial support registered for Edgeport 8 port adapter
[    4.759103] usbserial: USB Serial support registered for EPiC device
[    4.761295] usbcore: registered new interface driver io_ti
[    4.762871] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[    4.766504] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[    4.769385] usbcore: registered new interface driver empeg
[    4.771086] usbserial: USB Serial support registered for empeg
[    4.773140] usbcore: registered new interface driver f81232
[    4.774412] usbserial: USB Serial support registered for f81232
[    4.776422] usbcore: registered new interface driver f81534
[    4.778883] usbserial: USB Serial support registered for Fintek F81532/F81534
[    4.781424] usbcore: registered new interface driver ftdi_sio
[    4.782805] usbserial: USB Serial support registered for FTDI USB Serial Device
[    4.785054] usbcore: registered new interface driver garmin_gps
[    4.787111] usbserial: USB Serial support registered for Garmin GPS usb/tty
[    4.790553] usbcore: registered new interface driver ipaq
[    4.793212] usbserial: USB Serial support registered for PocketPC PDA
[    4.797334] usbcore: registered new interface driver ipw
[    4.799029] usbserial: USB Serial support registered for IPWireless converter
[    4.802299] usbcore: registered new interface driver ir_usb
[    4.806848] usbserial: USB Serial support registered for IR Dongle
[    4.809556] usbcore: registered new interface driver iuu_phoenix
[    4.812079] usbserial: USB Serial support registered for iuu_phoenix
[    4.816882] usbcore: registered new interface driver keyspan_pda
[    4.818972] usbserial: USB Serial support registered for Keyspan PDA
[    4.821168] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[    4.825272] usbcore: registered new interface driver kl5kusb105
[    4.830349] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
[    4.835196] usbcore: registered new interface driver mct_u232
[    4.839090] usbserial: USB Serial support registered for MCT U232
[    4.842147] usbcore: registered new interface driver metro_usb
[    4.845071] usbserial: USB Serial support registered for Metrologic USB to Serial
[    4.849124] usbcore: registered new interface driver mos7840
[    4.852188] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[    4.856198] usbcore: registered new interface driver navman
[    4.857929] usbserial: USB Serial support registered for navman
[    4.859390] usbcore: registered new interface driver omninet
[    4.860973] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[    4.862940] usbcore: registered new interface driver option
[    4.864383] usbserial: USB Serial support registered for GSM modem (1-port)
[    4.866198] usbcore: registered new interface driver oti6858
[    4.867687] usbserial: USB Serial support registered for oti6858
[    4.869058] usbcore: registered new interface driver pl2303
[    4.870450] usbserial: USB Serial support registered for pl2303
[    4.872186] usbcore: registered new interface driver qcaux
[    4.873856] usbserial: USB Serial support registered for qcaux
[    4.875458] usbcore: registered new interface driver quatech2
[    4.877191] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[    4.879241] usbcore: registered new interface driver safe_serial
[    4.880606] usbserial: USB Serial support registered for safe_serial
[    4.882021] usbcore: registered new interface driver sierra
[    4.883418] usbserial: USB Serial support registered for Sierra USB modem
[    4.885294] usbcore: registered new interface driver ssu100
[    4.887026] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[    4.889642] usbcore: registered new interface driver symbolserial
[    4.891013] usbserial: USB Serial support registered for symbol
[    4.892385] usbcore: registered new interface driver upd78f0730
[    4.894916] usbserial: USB Serial support registered for upd78f0730
[    4.896886] usbcore: registered new interface driver visor
[    4.898711] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[    4.900965] usbserial: USB Serial support registered for Sony Clie 5.0
[    4.902563] usbserial: USB Serial support registered for Sony Clie 3.5
[    4.904188] usbcore: registered new interface driver wishbone_serial
[    4.906046] usbserial: USB Serial support registered for wishbone_serial
[    4.907788] usbcore: registered new interface driver whiteheat
[    4.909170] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[    4.911446] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[    4.915006] usbcore: registered new interface driver adutux
[    4.917014] usbcore: registered new interface driver appledisplay
[    4.918461] usbcore: registered new interface driver cypress_cy7c63
[    4.919883] usbcore: registered new interface driver cytherm
[    4.921582] usbcore: registered new interface driver emi26 - firmware loader
[    4.923709] usbcore: registered new interface driver emi62 - firmware loader
[    4.925416] ftdi_elan: driver ftdi-elan
[    4.926405] usbcore: registered new interface driver ftdi-elan
[    4.927915] usbcore: registered new interface driver idmouse
[    4.929828] usbcore: registered new interface driver isight_firmware
[    4.931558] usbcore: registered new interface driver ldusb
[    4.932892] usbcore: registered new interface driver legousbtower
[    4.934295] usbcore: registered new interface driver usbtest
[    4.936079] usbcore: registered new interface driver uss720
[    4.938215] uss720: USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[    4.940446] uss720: NOTE: this is a special purpose driver to allow nonstandard
[    4.942173] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[    4.944255] uss720: If you just want to connect to a printer, use usblp instead
[    4.946415] usbcore: registered new interface driver usbsevseg
[    4.948687] usbcore: registered new interface driver yurex
[    4.951033] usbcore: registered new interface driver chaoskey
[    4.954230] usbcore: registered new interface driver sisusb
[    4.967002] usbcore: registered new interface driver lvs
[    4.972405] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    4.976925] dummy_hcd dummy_hcd.0: Dummy host controller
[    4.980263] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    4.985929] hub 1-0:1.0: USB hub found
[    4.988557] hub 1-0:1.0: 1 port detected
[    4.993064] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.000464] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.002755] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.196204] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.203251] usbcore: registered new interface driver pxrc
[    5.205673] usbcore: registered new interface driver xpad
[    5.211906] usbcore: registered new interface driver aiptek
[    5.215556] usbcore: registered new interface driver gtco
[    5.218802] usbcore: registered new interface driver kbtab
[    5.221568] usbcore: registered new interface driver pegasus_notetaker
[    5.229490] i2c /dev entries driver
[    5.233990] usbcore: registered new interface driver i2c-diolan-u2c
[    5.238943] i2c-parport-light: adapter type unspecified
[    5.243810] usbcore: registered new interface driver i2c-tiny-usb
[    5.246022] isa i2c-pca-isa.0: Please specify I/O base
[    5.247955] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[    5.250791] usbcore: registered new interface driver b2c2_flexcop_usb
[    5.252302] usbcore: registered new interface driver zr364xx
[    5.254338] usbcore: registered new interface driver stkwebcam
[    5.256122] usbcore: registered new interface driver s2255
[    5.260900] gspca_main: v2.14.0 registered
[    5.262858] usbcore: registered new interface driver benq
[    5.266467] usbcore: registered new interface driver conex
[    5.270081] usbcore: registered new interface driver cpia1
[    5.272996] usbcore: registered new interface driver jl2005bcd
[    5.276147] usbcore: registered new interface driver konica
[    5.279811] usbcore: registered new interface driver nw80x
[    5.281477] usbcore: registered new interface driver ov519
[    5.282839] usbcore: registered new interface driver ov534_9
[    5.284273] usbcore: registered new interface driver pac207
[    5.285985] usbcore: registered new interface driver se401
[    5.287574] usbcore: registered new interface driver sn9c2028
[    5.289409] usbcore: registered new interface driver gspca_sn9c20x
[    5.291468] usbcore: registered new interface driver sonixb
[    5.293241] usbcore: registered new interface driver sonixj
[    5.294607] usbcore: registered new interface driver spca501
[    5.296245] usbcore: registered new interface driver spca505
[    5.300119] usbcore: registered new interface driver spca508
[    5.302014] usbcore: registered new interface driver spca561
[    5.304124] usbcore: registered new interface driver spca1528
[    5.305754] usbcore: registered new interface driver sq905
[    5.307135] usbcore: registered new interface driver sq905c
[    5.308513] usbcore: registered new interface driver sunplus
[    5.310262] usbcore: registered new interface driver stk014
[    5.312160] usbcore: registered new interface driver stk1135
[    5.316813] usbcore: registered new interface driver stv0680
[    5.318302] usbcore: registered new interface driver t613
[    5.319702] usbcore: registered new interface driver gspca_topro
[    5.321342] usbcore: registered new interface driver vc032x
[    5.322910] usbcore: registered new interface driver vicam
[    5.324455] usbcore: registered new interface driver STV06xx
[    5.326313] usbcore: registered new interface driver cx231xx
[    5.328105] usbcore: registered new interface driver em28xx
[    5.329544] em28xx: Registered (Em28xx Audio Extension) extension
[    5.331141] em28xx: Registered (Em28xx Input Extension) extension
[    5.332666] usbcore: registered new interface driver usbtv
[    5.334235] Driver for 1-wire Dallas network protocol.
[    5.335938] usbcore: registered new interface driver DS9490R
[    5.340465] w83781d: Detection failed at step 2
[    5.342612] applesmc: supported laptop not found!
[    5.344318] applesmc: driver init failed (ret=-19)!
[    5.345979] f71882fg: Not a Fintek device
[    5.347159] f71882fg: Not a Fintek device
[    5.349569] pc87360: PC8736x not detected, module not inserted
[    5.352347] cpufreq_nforce2: No nForce2 chipset
[    5.354260] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    5.354590] random: get_random_u32 called from copy_process+0x11e/0x1770 with crng_init=0
[    5.359346] random: get_random_u32 called from cache_alloc_refill+0x42f/0x9a0 with crng_init=0
[    5.385425] usbcore: registered new interface driver vub300
[    5.393590] usbcore: registered new interface driver ushc
[    5.404009] No PC Engines board detected
[    5.414565] hidraw: raw HID events driver (C) Jiri Kosina
[    5.425300] usbcore: registered new interface driver usbhid
[    5.430083] usbhid: USB HID core driver
[    5.432292] dell_smbios: Unable to run on non-Dell system
[    5.434427]  fake-fmc-carrier: mezzanine 0
[    5.435807]       Manufacturer: fake-vendor
[    5.437203]       Product name: fake-design-for-testing
[    5.439187] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[    5.441343] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95
[    5.443380] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[    5.445157] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards
[    5.452767] wss: can't grab port 0x608
[    5.454085] cmi8328: probe of cmi8328.3 failed with error -16
[    5.456245] sc6000: specify IO port
[    5.458405] isa cs4231.0: please specify port
[    5.461221] isa azt1605.0: please specify port
[    5.463304] isa azt2316.0: please specify port
[    6.886416] isa sb8.0: please specify irq
[    6.890983] please specify port
[    6.894403] usbcore: registered new interface driver snd-usb-usx2y
[    6.896857] usbcore: registered new interface driver snd-usb-us122l
[    6.899952] usbcore: registered new interface driver snd-usb-caiaq
[    6.902600] usbcore: registered new interface driver snd-usb-6fire
[    6.904955] usbcore: registered new interface driver snd-usb-hiface
[    6.907322] usbcore: registered new interface driver snd_usb_pod
[    6.909594] usbcore: registered new interface driver snd_usb_podhd
[    6.911926] usbcore: registered new interface driver snd_usb_toneport
[    6.915995] _warn_unseeded_randomness: 6 callbacks suppressed
[    6.916063] random: get_random_u32 called from cache_random_seq_create+0x67/0x100 with crng_init=0
[    6.920528] NET: Registered protocol family 10
[    6.921785] random: get_random_u32 called from cache_alloc_refill+0x42f/0x9a0 with crng_init=0
[    6.926991] random: get_random_u32 called from neigh_hash_alloc+0x5e/0xa0 with crng_init=0
[    6.937345] Segment Routing with IPv6
[    6.939088] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    6.945647] Key type dns_resolver registered
[    6.952923] ... APIC ID:      00000000 (0)
[    6.953355] ... APIC VERSION: 01050014
[    6.953355] 0000000000000000000000000000000000000000000000000000000000000000
[    6.953355] 0000000000000000000000000000000000000000000000000000000000000000
[    6.953355] 0000000000000000000000000000000000000000000000000000000000001000
[    6.964539] number of MP IRQ sources: 15.
[    6.966567] number of IO-APIC #0 registers: 24.
[    6.968217] testing the IO APIC.......................
[    6.969402] IO APIC #0......
[    6.970206] .... register #00: 00000000
[    6.971152] .......    : physical APIC id: 00
[    6.972338] .......    : Delivery Type: 0
[    6.973414] .......    : LTS          : 0
[    6.974427] .... register #01: 00170011
[    6.975462] .......     : max redirection entries: 17
[    6.976595] .......     : PRQ implemented: 0
[    6.977625] .......     : IO APIC version: 11
[    6.978765] .... register #02: 00000000
[    6.979857] .......     : arbitration: 00
[    6.980827] .... IRQ redirection table:
[    6.981751] IOAPIC 0:
[    6.982422]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.984551]  pin01, enabled , edge , high, V(24), IRR(0), S(0), logical , D(01), M(0)
[    6.986521]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(0)
[    6.988474]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.990624]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.993393]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.996767]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.999829]  pin07, enabled , edge , high, V(22), IRR(0), S(0), logical , D(01), M(0)
[    7.003676]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.006964]  pin09, enabled , level, high, V(21), IRR(0), S(0), logical , D(01), M(0)
[    7.010793]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.013957]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.017608]  pin0c, enabled , edge , high, V(23), IRR(0), S(0), logical , D(01), M(0)
[    7.020763]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.022537]  pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.024377]  pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.026311]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.029190]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.035470]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.037281]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.039034]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.040972]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.042737]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.045359]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.048273] IRQ to pin mappings:
[    7.049624] IRQ0 -> 0:2
[    7.050783] IRQ1 -> 0:1
[    7.051937] IRQ3 -> 0:3
[    7.053040] IRQ4 -> 0:4
[    7.054683] IRQ5 -> 0:5
[    7.055836] IRQ6 -> 0:6
[    7.056983] IRQ7 -> 0:7
[    7.058099] IRQ8 -> 0:8
[    7.059170] IRQ9 -> 0:9
[    7.060333] IRQ10 -> 0:10
[    7.061494] IRQ11 -> 0:11
[    7.062676] IRQ12 -> 0:12
[    7.063941] IRQ13 -> 0:13
[    7.065265] IRQ14 -> 0:14
[    7.066500] IRQ15 -> 0:15
[    7.067689] .................................... done.
[    7.069873] Using IPI No-Shortcut mode
[    7.071597] sched_clock: Marking stable (7071344784, 0)->(7836347271, -765002487)
[    7.076230] Key type trusted registered
[    7.078836]   Magic number: 6:923:147
[    7.081097] acpi device:18: hash matches
[    7.090866] Duplicate name in testcase-data, renamed to "duplicate-name#1"
[    7.097794] ### dt-test ### start of unittest - you will see error messages
[    7.100947] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    7.105437] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    7.109942] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    7.112930] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    7.116034] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    7.119430] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    7.122835] OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1
[    7.126567] OF: /testcase-data/phandle-tests/consumer-b: could not find phandle
[    7.128404] OF: /testcase-data/phandle-tests/consumer-b: arguments longer than property
[    7.135453] ### dt-test ### end of unittest - 162 passed, 0 failed
[    7.155031] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    7.159088] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.170065] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.187090] Sending DHCP requests ., OK
[    7.191256] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[    7.193028] IP-Config: Complete:
[    7.194121]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[    7.200032]      host=vm-lkp-hsw-4ep1-openwrt-i386-11, domain=, nis-domain=(none)
[    7.202024]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[    7.204918] ALSA device list:
[    7.206078]   No soundcards found.
[    7.229541] Freeing unused kernel memory: 976K
[    7.250449] Write protecting the kernel text: 12064k
[    7.257588] Write protecting the kernel read-only data: 4180k
[    7.274692] cgroup1: Need name or subsystem set
[    7.275219] cgroup1: No subsys list or none specified
[    7.279113] Filesystem cgroup get_tree() didn't set fc->root
[    7.291675] ------------[ cut here ]------------
[    7.295290] kernel BUG at fs/super.c:1775!
[    7.297885] invalid opcode: 0000 [#1] PREEMPT SMP
[    7.303028] CPU: 0 PID: 1 Comm: init Not tainted 4.17.0-rc5-00204-g0dd4eca #54
[    7.311821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[    7.322843] EIP: vfs_get_tree+0x16d/0x170
[    7.326346] EFLAGS: 00010246 CPU: 0
[    7.327808] EAX: 00000030 EBX: ce1a19c0 ECX: 00000000 EDX: ce1a19c0
[    7.330450] ESI: ce1a19c0 EDI: 00000000 EBP: c7de1f04 ESP: c7de1eec
[    7.336866]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[    7.341293] CR0: 80050033 CR2: b7f3f588 CR3: 0bab1000 CR4: 00000690
[    7.346567] Call Trace:
[    7.349189]  ? vfs_set_fs_source+0x70/0x70
[    7.350853]  ? vfs_set_fs_source+0x70/0x70
[    7.352936]  do_mount+0x21a/0xaa0
[    7.355547]  ksys_mount+0xc4/0x140
[    7.359244]  sys_mount+0x19/0x20
[    7.362170]  do_int80_syscall_32+0x76/0x190
[    7.367179]  entry_INT80_32+0x36/0x36
[    7.371221] EIP: 0xb7f36c3e
[    7.375471] EFLAGS: 00000296 CPU: 0
[    7.378821] EAX: ffffffda EBX: 0804a3a9 ECX: 0804a3a1 EDX: 0804a3a9
[    7.381308] ESI: 0000000e EDI: 00000000 EBP: bfc00db8 ESP: bfc00d1c
[    7.383960]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[    7.388781] Code: c7 43 0c 00 00 00 00 e8 b2 e2 ff ff b8 f4 ff ff ff eb 8f 8d 76 00 b8 fe ff ff ff c3 8b 43 04 ff 30 68 e8 7d ec c1 e8 d4 b1 f0 ff <0f> 0b 90 55 89 c8 89 e5 5d c3 89 f6 8d bc 27 00 00 00 00 55 31 
[    7.408953] EIP: vfs_get_tree+0x16d/0x170 SS:ESP: 0068:c7de1eec
[    7.420191] ---[ end trace 2ff80a4e86e2d2e8 ]---
[    7.423983] Kernel panic - not syncing: Fatal exception
[    7.428851] Kernel Offset: disabled

Elapsed time: 10

#!/bin/bash

# To reproduce,
# 1) save job-script and this script (both are attached in 0day report email)
# 2) run this script with your compiled kernel and optional env $INSTALL_MOD_PATH

kernel=$1

initrds=(
	/osimage/openwrt/openwrt-i386-2016-03-16.cgz
	/lkp/lkp/lkp-i386.cgz
	/osimage/pkg/debian-x86_64-2016-08-31.cgz/trinity-static-i386-x86_64-6ddabfd2_2017-11-10.cgz
)

HTTP_PREFIX=https://download.01.org/0day-ci/lkp-qemu
wget --timestamping "${initrds[@]/#/$HTTP_PREFIX}"

{
	cat "${initrds[@]//*\//}"
	[[ $INSTALL_MOD_PATH ]] && (
		cd "$INSTALL_MOD_PATH"
		find lib | cpio -o -H newc --quiet | gzip
	)
	echo  job-script | cpio -o -H newc --quiet | gzip
} > initrd.img

kvm=(
	qemu-system-i386
	-enable-kvm
	-kernel $kernel
	-initrd initrd.img
	-m 256
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-serial stdio
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-hsw-4ep1-openwrt-i386-11::dhcp
	root=/dev/ram0
	user=lkp
	job=/job-script
	ARCH=i386
	kconfig=i386-randconfig-s0-201822
	branch=dhowells-fs/mount-context
	commit=0dd4eca846629b5dc7d11ca40ae2a1379334b9e4
	BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201822/gcc-6/0dd4eca846629b5dc7d11ca40ae2a1379334b9e4/vmlinuz-4.17.0-rc5-00204-g0dd4eca
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw-4ep1-openwrt-i386/openwrt-i386-2016-03-16.cgz/i386-randconfig-s0-201822/gcc-6/0dd4eca846629b5dc7d11ca40ae2a1379334b9e4/0
	result_service=tmpfs
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	console=tty0
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	vga=normal
	rw
	drbd.minor_count=8
	rcuperf.shutdown=0
)

"${kvm[@]}" -append "${append[*]}"
