Hello Dmitry, > Sorry for the delay. Could you please tell me if the patch below (shoudl > apply on top of your v5 version) works?
The patch applies cleanly and we will give the code a thorough test. > diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt > b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt > index 030a888365dff..1aaa647cc3eaa 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt > @@ -5,13 +5,14 @@ Required properties: > - reg : i2c device address of the chip (0x40 or 0x41) > - interrupt-parent : the phandle for the gpio controller > - interrupts : (gpio) interrupt to which the chip is connected > - - reset-gpios : gpio pin to reset the chip (active low) > - rohm,x-plate-ohms : x-plate resistance in Ohm > > Optional properties: > + - reset-gpios : gpio pin to reset the chip (active low) > - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) > - touchscreen-size-y : vertical resolution of touchscreen (in pixels) > - touchscreen-max-pressure: maximum pressure value > + - vdd-supply : power supply for the controoler There is a typo in controller. Greetings, Mark Building Technologies, Panel Software Fire (BT-FIR/ENG1) Bosch Sicherheitssysteme GmbH | Postfach 11 11 | 85626 Grasbrunn | GERMANY | www.boschsecurity.com Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 23118 Aufsichtsratsvorsitzender: Stefan Hartung; Geschäftsführung: Gert van Iperen, Andreas Bartz, Thomas Quante, Bernhard Schuster
