The pinctrl settings were incorrect for the touchscreen interrupt line, causing
an interrupt storm. This change has been tested with both the atmel_mxt_ts and
RMI4 drivers on the RDU1 units.
The value 0x4 comes from the value of register IOMUXC_SW_PAD_CTL_PAD_CSI1_D8
from the old vendor kernel.
Signed-off-by: Nick Dyer <n...@shmanahar.org>
Fixes: ceef0396f367 ("ARM: dts: imx: add ZII RDU1 board")
Cc: <sta...@vger.kernel.org> # 4.15+
Reviewed-by: Fabio Estevam <fabio.este...@nxp.com>
---
Changes in v4:
- Add reviewed by Fabio
Changes in v3:
- Update commit message to add source of 0x4 value, fixes tag and CC stable
Changes in v2:
- Use hex, only alter IRQ line config
arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts
b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index df9eca94d812..8a878687197b 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -770,7 +770,7 @@
pinctrl_ts: tsgrp {
fsl,pins = <
- MX51_PAD_CSI1_D8__GPIO3_12 0x85
+ MX51_PAD_CSI1_D8__GPIO3_12 0x04
MX51_PAD_CSI1_D9__GPIO3_13 0x85
>;
};
--
2.17.1
