Some wacom w9013 devices have a vddl supply for "low valtage" requirements. Add support in this driver to turn on this low voltage supply. We can also drop a handful of error messages because the regulator core is already printing an error when bulk regulators fail to enable or disable.
Cc: Benjamin Tissoires <[email protected]> Cc: Hans de Goede <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Doug Anderson <[email protected]> Acked-by: Rob Herring <[email protected]> Cc: <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> --- Changes from v1: * Use the bulk regulator APIs instead of open coding it (Dmitry) .../bindings/input/hid-over-i2c.txt | 3 +- drivers/hid/i2c-hid/i2c-hid.c | 62 +++++++++---------- include/linux/platform_data/i2c-hid.h | 7 +-- 3 files changed, 36 insertions(+), 36 deletions(-) diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt index 4d3da9d91de4..89e6ab89ba38 100644 --- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt @@ -26,7 +26,8 @@ device-specific compatible properties, which should be used in addition to the - compatible: * "wacom,w9013" (Wacom W9013 digitizer). Supports: - - vdd-supply + - vdd-supply (3.3V) + - vddl-supply (1.8V) - post-power-on-delay-ms - vdd-supply: phandle of the regulator that provides the supply voltage. diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index c1652bb7bd15..1d83531454c5 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -1002,18 +1002,21 @@ static int i2c_hid_probe(struct i2c_client *client, return client->irq; } - ihid = kzalloc(sizeof(struct i2c_hid), GFP_KERNEL); + ihid = devm_kzalloc(&client->dev, sizeof(*ihid), GFP_KERNEL); if (!ihid) return -ENOMEM; if (client->dev.of_node) { ret = i2c_hid_of_probe(client, &ihid->pdata); if (ret) - goto err; + return ret; } else if (!platform_data) { ret = i2c_hid_acpi_pdata(client, &ihid->pdata); - if (ret) - goto err; + if (ret) { + dev_err(&client->dev, + "HID register address not provided\n"); + return ret; + } } else { ihid->pdata = *platform_data; } @@ -1021,21 +1024,20 @@ static int i2c_hid_probe(struct i2c_client *client, /* Parse platform agnostic common properties from ACPI / device tree */ i2c_hid_fwnode_probe(client, &ihid->pdata); - ihid->pdata.supply = devm_regulator_get(&client->dev, "vdd"); - if (IS_ERR(ihid->pdata.supply)) { - ret = PTR_ERR(ihid->pdata.supply); - if (ret != -EPROBE_DEFER) - dev_err(&client->dev, "Failed to get regulator: %d\n", - ret); - goto err; - } + ihid->pdata.supplies[0].supply = "vdd"; + ihid->pdata.supplies[1].supply = "vddl"; + + ret = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(ihid->pdata.supplies), + ihid->pdata.supplies); + if (ret) + return ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ihid->pdata.supplies), + ihid->pdata.supplies); + if (ret < 0) + return ret; - ret = regulator_enable(ihid->pdata.supply); - if (ret < 0) { - dev_err(&client->dev, "Failed to enable regulator: %d\n", - ret); - goto err; - } if (ihid->pdata.post_power_delay_ms) msleep(ihid->pdata.post_power_delay_ms); @@ -1122,11 +1124,9 @@ static int i2c_hid_probe(struct i2c_client *client, pm_runtime_disable(&client->dev); err_regulator: - regulator_disable(ihid->pdata.supply); - -err: + regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies), + ihid->pdata.supplies); i2c_hid_free_buffers(ihid); - kfree(ihid); return ret; } @@ -1148,9 +1148,8 @@ static int i2c_hid_remove(struct i2c_client *client) if (ihid->bufsize) i2c_hid_free_buffers(ihid); - regulator_disable(ihid->pdata.supply); - - kfree(ihid); + regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies), + ihid->pdata.supplies); return 0; } @@ -1201,9 +1200,8 @@ static int i2c_hid_suspend(struct device *dev) hid_warn(hid, "Failed to enable irq wake: %d\n", wake_status); } else { - ret = regulator_disable(ihid->pdata.supply); - if (ret < 0) - hid_warn(hid, "Failed to disable supply: %d\n", ret); + regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies), + ihid->pdata.supplies); } return 0; @@ -1218,9 +1216,11 @@ static int i2c_hid_resume(struct device *dev) int wake_status; if (!device_may_wakeup(&client->dev)) { - ret = regulator_enable(ihid->pdata.supply); - if (ret < 0) - hid_warn(hid, "Failed to enable supply: %d\n", ret); + ret = regulator_bulk_enable(ARRAY_SIZE(ihid->pdata.supplies), + ihid->pdata.supplies); + if (ret) + hid_warn(hid, "Failed to enable supplies: %d\n", ret); + if (ihid->pdata.post_power_delay_ms) msleep(ihid->pdata.post_power_delay_ms); } else if (ihid->irq_wake_enabled) { diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h index 1fb088239d12..c628bb5e1061 100644 --- a/include/linux/platform_data/i2c-hid.h +++ b/include/linux/platform_data/i2c-hid.h @@ -12,14 +12,13 @@ #ifndef __LINUX_I2C_HID_H #define __LINUX_I2C_HID_H +#include <linux/regulator/consumer.h> #include <linux/types.h> -struct regulator; - /** * struct i2chid_platform_data - used by hid over i2c implementation. * @hid_descriptor_address: i2c register where the HID descriptor is stored. - * @supply: regulator for powering on the device. + * @supplies: regulators for powering on the device. * @post_power_delay_ms: delay after powering on before device is usable. * * Note that it is the responsibility of the platform driver (or the acpi 5.0 @@ -35,7 +34,7 @@ struct regulator; */ struct i2c_hid_platform_data { u16 hid_descriptor_address; - struct regulator *supply; + struct regulator_bulk_data supplies[2]; int post_power_delay_ms; }; -- Sent by a computer through tubes
