On 25/06/2018 09:10, Stanley Chu wrote:
> Add binding documentation for the System Timer driver of
> the Mediatek SoCs.
>
> Signed-off-by: Stanley Chu <[email protected]>
> ---
> .../bindings/timer/mediatek,mtk-systimer.txt | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/timer/mediatek,mtk-systimer.txt
>
> diff --git
> a/Documentation/devicetree/bindings/timer/mediatek,mtk-systimer.txt
> b/Documentation/devicetree/bindings/timer/mediatek,mtk-systimer.txt
> new file mode 100644
> index 0000000..735a6fd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-systimer.txt
> @@ -0,0 +1,18 @@
> +Mediatek System Timers
> +----------------------
> +
> +Required properties:
> +- compatible: should contain
> + "mediatek,sys_timer" for those platforms which support system timer.
> +- reg: Mandatory. The location and length for system timer registers.
> +- clock-frequency: Optional. If not assigned specifically, default
> + value 13000000 (means 13 MHz) would be applied.
The driver tells there is an error if it is not defined, so it can't be
optional.
> +Examples:
> +
> + sys_timer@10017000 {
> + compatible = "mediatek,sys_timer";
> + reg = <0 0x10017000 0 0x1000>;
> + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <13000000>;
Replace it by a phandle to a 'fixed-clock'.
eg.
clocks = <&myclk>;
> + };
myclk: myclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
};
Thanks
-- DAniel
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
