On 28.6.2018 07:42, Luis Araneda wrote:
> The real name of the board is ZedBoard, from Avnet
>
> Signed-off-by: Luis Araneda <luaran...@gmail.com>
> ---
> Documentation/devicetree/bindings/arm/xilinx.txt | 2 +-
> arch/arm/boot/dts/Makefile | 2 +-
> arch/arm/boot/dts/{zynq-zed.dts => zynq-zedboard.dts} | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
> rename arch/arm/boot/dts/{zynq-zed.dts => zynq-zedboard.dts} (93%)
>
> diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt
> b/Documentation/devicetree/bindings/arm/xilinx.txt
> index f1e911058..d10adc4d0 100644
> --- a/Documentation/devicetree/bindings/arm/xilinx.txt
> +++ b/Documentation/devicetree/bindings/arm/xilinx.txt
> @@ -30,7 +30,7 @@ Additional compatible strings:
> "xlnx,zynq-zc770-xm013"
>
> - Avnet ZedBoard board
> - "avnet,zynq-zed"
> + "avnet,zynq-zedboard"
>
> - Digilent Zybo board
> "digilent,zynq-zybo"
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 37a3de760..e4c39e26f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1108,7 +1108,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
> zynq-zc770-xm011.dtb \
> zynq-zc770-xm012.dtb \
> zynq-zc770-xm013.dtb \
> - zynq-zed.dtb \
> + zynq-zedboard.dtb \
> zynq-zybo.dtb \
> zynq-zybo-z7.dtb
> dtb-$(CONFIG_MACH_ARMADA_370) += \
> diff --git a/arch/arm/boot/dts/zynq-zed.dts
> b/arch/arm/boot/dts/zynq-zedboard.dts
> similarity index 93%
> rename from arch/arm/boot/dts/zynq-zed.dts
> rename to arch/arm/boot/dts/zynq-zedboard.dts
> index bf3e26dbf..540581c56 100644
> --- a/arch/arm/boot/dts/zynq-zed.dts
> +++ b/arch/arm/boot/dts/zynq-zedboard.dts
> @@ -8,7 +8,7 @@
>
> / {
> model = "Avnet ZedBoard board";
> - compatible = "avnet,zynq-zed", "xlnx,zynq-7000";
> + compatible = "avnet,zynq-zedboard", "xlnx,zynq-7000";
>
> aliases {
> ethernet0 = &gem0;
>
It will just cause confusion and I can't see any benefit to rename this
file. If you want to state different compatible string with full board
name I am fine with that but that's it.
Thanks,
Michal
