On June 30, 2018 3:33:26 PM GMT+02:00, Manivannan Sadhasivam <[email protected]> wrote: >Add I2C controller nodes for Actions Semiconductor S900 SoC. > >Signed-off-by: Manivannan Sadhasivam <[email protected]> >--- > arch/arm64/boot/dts/actions/s900.dtsi | 60 +++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > >diff --git a/arch/arm64/boot/dts/actions/s900.dtsi >b/arch/arm64/boot/dts/actions/s900.dtsi >index 7ae8b931f000..6f7b89edbe4d 100644 >--- a/arch/arm64/boot/dts/actions/s900.dtsi >+++ b/arch/arm64/boot/dts/actions/s900.dtsi >@@ -174,6 +174,66 @@ > #clock-cells = <1>; > }; > >+ i2c0: i2c@e0170000 { >+ compatible = "actions,s900-i2c"; >+ reg = <0 0xe0170000 0 0x1000>; >+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; >+ #address-cells = <1>; >+ #size-cells = <0>; >+ status = "disabled"; >+ pinctrl-names = "default"; >+ pinctrl-0 = <&i2c0_default>; >+ }; >+ >+ i2c1: i2c@e0172000 { >+ compatible = "actions,s900-i2c"; >+ reg = <0 0xe0172000 0 0x1000>; >+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; >+ #address-cells = <1>; >+ #size-cells = <0>; >+ status = "disabled"; >+ pinctrl-names = "default"; >+ pinctrl-0 = <&i2c1_default>; >+ }; >+ >+ i2c2: i2c@e0174000 { >+ compatible = "actions,s900-i2c"; >+ reg = <0 0xe0174000 0 0x1000>; >+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; >+ #address-cells = <1>; >+ #size-cells = <0>; >+ status = "disabled"; >+ pinctrl-names = "default"; >+ pinctrl-0 = <&i2c2_default>; >+ }; >+ >+ i2c3: i2c@e0176000 { >+ compatible = "actions,s900-i2c"; >+ reg = <0 0xe0176000 0 0x1000>; >+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; >+ #address-cells = <1>; >+ #size-cells = <0>; >+ status = "disabled"; >+ }; >+ >+ i2c4: i2c@e0178000 { >+ compatible = "actions,s900-i2c"; >+ reg = <0 0xe0178000 0 0x1000>; >+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; >+ #address-cells = <1>; >+ #size-cells = <0>; >+ status = "disabled"; >+ }; >+ >+ i2c5: i2c@e017a000 { >+ compatible = "actions,s900-i2c"; >+ reg = <0 0xe017a000 0 0x1000>; >+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; >+ #address-cells = <1>; >+ #size-cells = <0>; >+ status = "disabled"; >+ }; >+ > pinctrl: pinctrl@e01b0000 { > compatible = "actions,s900-pinctrl"; > reg = <0x0 0xe01b0000 0x0 0x1000>;
This patch *still* depends on patch 3/6. You need to reorder the series so that it is properly bisectable. Cheers, Peter
