[PATCH v4 4/6] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board

[Manivannan Sadhasivam]

Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
---
 arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts 
b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index d0ba35df9015..57ae374cfb5a 100644
--- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "s900.dtsi"
+#include "s900-bubblegum-96-pins.dtsi"
 
 / {
        compatible = "ucrobotics,bubblegum-96", "actions,s900";
@@ -35,6 +36,16 @@
        clocks = <&cmu CLK_UART5>;
 };
 
+&i2c1 {
+       status = "okay";
+       clocks = <&cmu CLK_I2C1>;
+};
+
+&i2c2 {
+       status = "okay";
+       clocks = <&cmu CLK_I2C2>;
+};
+
 /*
  * GPIO name legend: proper name = the GPIO line is used as GPIO
  *         NC = not connected (pin out but not routed from the chip to
-- 
2.17.1