On 06.07.2018 22:39, Alexandre Belloni wrote:
Hi Codrin,
On 18/06/2018 17:12:38+0300, Codrin Ciubotariu wrote:
From: Cyrille Pitchen <cyrille.pitc...@atmel.com>
This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for
each I2S node.
Signed-off-by: Cyrille Pitchen <cyrille.pitc...@atmel.com>
[codrin.ciubota...@microchip.com: added phandle to new mux clock]
Signed-off-by: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
---
The bindings for the I2S node are applied to broonie/sound.git .
Changes in v5:
- the previous name was:
[PATCH v4 6/7] ARM: dts: at91: sama5d2: add nodes for I2S controllers
arch/arm/boot/dts/sama5d2.dtsi | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index eeb6afa1cda7..eca73ce40bc5 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -58,6 +58,8 @@
serial1 = &uart3;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2s0 = &i2s0;
+ i2s1 = &i2s1;
};
cpus {
@@ -1313,6 +1315,22 @@
clocks = <&clk32k>;
};
+ i2s0: i2s@f8050000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xf8050000 0x100>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>,
<&i2s0muxck>;
+ clock-names = "pclk", "gclk", "aclk", "muxclk";
+ status = "disabled";
+ };
+
Can you resend the DTS patches after removing the unnecessary clocks?
I will. Should I also make the "muxclk" clock an assigned clock to
assign its parent ?
Thanks and best regards,
Codrin
