On 7/24/2018 3:24 AM, Douglas Anderson wrote:
Add both the interface and core clock.

Signed-off-by: Douglas Anderson <diand...@chromium.org>
---

Changes in v2:
- Only 19.2, 100, 150, and 300 MHz now.
- All clocks come from MAIN rather than EVEN.
- Use parent map 0 instead of new parent map 9.

  drivers/clk/qcom/gcc-sdm845.c | 63 +++++++++++++++++++++++++++++++++++
  1 file changed, 63 insertions(+)

diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 0f694ed4238a..5bca634e277a 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -162,6 +162,13 @@ static const char * const gcc_parent_names_10[] = {
        "core_bi_pll_test_se",
  };
+static const char * const gcc_parent_names_9[] = {
+       "bi_tcxo",
+       "gpll0",
+       "gpll0_out_even",
+       "core_pi_sleep_clk",
+};
+

Please remove this.

  static struct clk_alpha_pll gpll0 = {
        .offset = 0x0,
        .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
@@ -358,6 +365,28 @@ static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
        },
  };
+static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = {
+       F(19200000, P_BI_TCXO, 1, 0, 0),
+       F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+       F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+       F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+       { }
+};
+
+static struct clk_rcg2 gcc_qspi_core_clk_src = {
+       .cmd_rcgr = 0x4b008,
+       .mnd_width = 0,
+       .hid_width = 5,
+       .parent_map = gcc_parent_map_0,
+       .freq_tbl = ftbl_gcc_qspi_core_clk_src,
+       .clkr.hw.init = &(struct clk_init_data){
+               .name = "gcc_qspi_core_clk_src",
+               .parent_names = gcc_parent_names_9,
This would point to "gcc_parent_names_0".
+               .num_parents = 4,
+               .ops = &clk_rcg2_floor_ops,
+       },
+};
+
  static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
        F(9600000, P_BI_TCXO, 2, 0, 0),
        F(19200000, P_BI_TCXO, 1, 0, 0),
@@ -1935,6 +1964,37 @@ static struct clk_branch gcc_qmip_video_ahb_clk = {
        },
  };
+static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = {
+       .halt_reg = 0x4b000,
+       .halt_check = BRANCH_HALT,
+       .clkr = {
+               .enable_reg = 0x4b000,
+               .enable_mask = BIT(0),
+               .hw.init = &(struct clk_init_data){
+                       .name = "gcc_qspi_cnoc_periph_ahb_clk",
+                       .ops = &clk_branch2_ops,
+               },
+       },
+};
+
+static struct clk_branch gcc_qspi_core_clk = {
+       .halt_reg = 0x4b004,
+       .halt_check = BRANCH_HALT,
+       .clkr = {
+               .enable_reg = 0x4b004,
+               .enable_mask = BIT(0),
+               .hw.init = &(struct clk_init_data){
+                       .name = "gcc_qspi_core_clk",
+                       .parent_names = (const char *[]){
+                               "gcc_qspi_core_clk_src",
+                       },
+                       .num_parents = 1,
+                       .flags = CLK_SET_RATE_PARENT,
+                       .ops = &clk_branch2_ops,
+               },
+       },
+};
+
  static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
        .halt_reg = 0x17030,
        .halt_check = BRANCH_HALT_VOTED,
@@ -3383,6 +3443,9 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
        [GPLL4] = &gpll4.clkr,
        [GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
        [GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
+       [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
+       [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
+       [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
  };
static const struct qcom_reset_map gcc_sdm845_resets[] = {


--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

Reply via email to