4.9-stable review patch. If anyone has any objections, please let me know.
------------------ From: Shawn Lin <[email protected]> [ Upstream commit ff178981bd5fd1667f373098740cb1c6d6efa1ba ] Respect the actual clock for mmc debugfs to help better debug the hardware. mmc_host mmc0: Bus speed (slot 0) = 135475200Hz (slot req 150000000Hz, actual 135475200HZ div = 0) cat /sys/kernel/debug/mmc0/ios clock: 150000000 Hz actual clock: 135475200 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 3 (8 bits) timing spec: 9 (mmc HS200) signal voltage: 0 (1.80 V) driver type: 0 (driver type B) Cc: Xiao Yao <[email protected]> Cc: Ziyuan <[email protected]> Signed-off-by: Shawn Lin <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/mmc/host/dw_mmc.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1164,6 +1164,8 @@ static void dw_mci_setup_bus(struct dw_m if (host->state == STATE_WAITING_CMD11_DONE) sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH; + slot->mmc->actual_clock = 0; + if (!clock) { mci_writel(host, CLKENA, 0); mci_send_cmd(slot, sdmmc_cmd_bits, 0); @@ -1209,6 +1211,8 @@ static void dw_mci_setup_bus(struct dw_m /* keep the last clock value that was requested from core */ slot->__clk_old = clock; + slot->mmc->actual_clock = div ? ((host->bus_hz / div) >> 1) : + host->bus_hz; } host->current_speed = clock;
