Hi Krzysztof,
On 2018-08-06 18:09, Krzysztof Kozlowski wrote:
> The LDO28 is used only on Odroid XU3 for Display Port. Define it so DTS
> will describe entire hardware.
>
> Depending on bootloader behavior this might affect the Display Port
> because none of drivers are enabling it. By default it is off in S2MPS11
> PMIC reset values. However it could be enabled by bootloader so in such
> case kernel will later disable it as unused regulator.
>
> Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
Odroid XU3 boots fine with this patch. Display Port is not yet enabled in
mainline for OdroidXU3, so there is not much else to test for now.
Tested-by: Marek Szyprowski <m.szyprow...@samsung.com>
> ---
>
> Not tested on Odroid XU3 with Display Port.
> ---
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 +++++++
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 6 ++++++
> 2 files changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> index b0dc9cc81b94..178e1064cfc7 100644
> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> @@ -331,6 +331,13 @@
> regulator-always-on;
> };
>
> + ldo28_reg: LDO28 {
> + /* Used on XU3 */
> + regulator-name = "vdd_ldo26";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3950000>;
> + };
> +
> ldo29_reg: LDO29 {
> /* Unused */
> regulator-name = "vdd_ldo29";
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> index 0322f281912c..db0bc17a667b 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> @@ -49,6 +49,12 @@
> };
> };
>
> +&ldo28_reg {
> + regulator-name = "dp_p3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +};
> +
> &pwm {
> /*
> * PWM 0 -- fan
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
