On Tue, Aug 07, 2018 at 04:59:58PM +0300, Aapo Vienamo wrote:
> Parse and program the HS400 DQS trim value from dt. Program a fallback
> value in case the property is missing.
>
> Signed-off-by: Aapo Vienamo <avien...@nvidia.com>
> ---
> drivers/mmc/host/sdhci-tegra.c | 32 +++++++++++++++++++++++++++++---
> 1 file changed, 29 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index 7f1ac4a..426f7ea 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -43,6 +43,10 @@
> #define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3)
> #define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
>
> +#define SDHCI_TEGRA_VENDOR_CAP_OVERRIDES 0x10c
> +#define SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_MASK 0x00003f00
> +#define SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_SHIFT 8
> +
> #define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
> #define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
> #define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
> @@ -112,6 +116,7 @@ struct sdhci_tegra {
>
> u32 default_tap;
> u32 default_trim;
> + u32 dqs_trim;
> };
>
> static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
> @@ -500,7 +505,7 @@ static void tegra_sdhci_parse_pad_autocal_dt(struct
> sdhci_host *host)
> autocal->pull_down_hs400 = autocal->pull_down_1v8;
> }
>
> -static void tegra_sdhci_parse_default_tap_and_trim(struct sdhci_host *host)
> +static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
> @@ -515,6 +520,11 @@ static void
> tegra_sdhci_parse_default_tap_and_trim(struct sdhci_host *host)
> &tegra_host->default_trim);
> if (err)
> tegra_host->default_trim = 0;
> +
> + err = device_property_read_u32(host->mmc->parent, "nvidia,dqs-trim",
> + &tegra_host->dqs_trim);
> + if (err)
> + tegra_host->dqs_trim = 0x11;
Okay, so there's only one value. I think that should be clarified in the
bindings documentation. It should mention that a single cell is used for
this. Also, I assume there are lower and upper limits for the valid
range of DQS trim values. Might make sense to specify those in the DT
bindings as well.
> }
>
> static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int
> clock)
> @@ -545,20 +555,33 @@ static unsigned int tegra_sdhci_get_max_clock(struct
> sdhci_host *host)
> return clk_round_rate(pltfm_host->clk, UINT_MAX);
> }
>
> +static void tegra_sdhci_set_dqs_trim(struct sdhci_host *host, u8 val)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CAP_OVERRIDES);
> + reg &= ~SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_MASK;
> + reg |= val<<SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_SHIFT;
> + sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_CAP_OVERRIDES);
> +}
Nit: I dislike using "reg" as a variable representing a register value
because I keep interpreting it as designating a register offset. Hence
I tend to use more explicit "offset" for actual register offsets and
"value" for register values.
But maybe that's just me.
Thierry
signature.asc
Description: PGP signature
