4.17-stable review patch. If anyone has any objections, please let me know.
------------------ From: BingJing Chang <[email protected]> [ Upstream commit bda3153998f3eb2cafa4a6311971143628eacdbc ] During assemble, the spare marked for replacement is not checked. conf->fullsync cannot be updated to be 1. As a result, recovery will treat it as a clean array. All recovering sectors are skipped. Original device is replaced with the not-recovered spare. mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123] mdadm /dev/md0 -a /dev/loop4 mdadm /dev/md0 --replace /dev/loop0 mdadm -S /dev/md0 # stop array during recovery mdadm -A /dev/md0 /dev/loop[01234] After reassemble, you can see recovery go on, but it completes immediately. In fact, recovery is not actually processed. To solve this problem, we just add the missing logics for replacment spares. (In raid1.c or raid5.c, they have already been checked.) Reported-by: Alex Chen <[email protected]> Reviewed-by: Alex Wu <[email protected]> Reviewed-by: Chung-Chiang Cheng <[email protected]> Signed-off-by: BingJing Chang <[email protected]> Signed-off-by: Shaohua Li <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/md/raid10.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3892,6 +3892,13 @@ static int raid10_run(struct mddev *mdde disk->rdev->saved_raid_disk < 0) conf->fullsync = 1; } + + if (disk->replacement && + !test_bit(In_sync, &disk->replacement->flags) && + disk->replacement->saved_raid_disk < 0) { + conf->fullsync = 1; + } + disk->recovery_disabled = mddev->recovery_disabled - 1; }
