The default value of the PERIOD_LEN register is 0 and results in
axi-i2s keeping TLAST always asserted in its AXI Stream output.

When the AXI Stream is sent to a Xilinx AXI-DMA, this results in the
DMA generating an interrupt flood and ALSA produce a corrupted
recording. This is because AXI-DMA raises an interrupt whenever TLAST
is active.

Fix by setting the PERIOD_LEN register as soon as the period is
known. This way TLAST is emitted once per period, and the DMA raises
interrupts correctly.

Signed-off-by: Luca Ceresoli <[email protected]>
---
 sound/soc/adi/axi-i2s.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/sound/soc/adi/axi-i2s.c b/sound/soc/adi/axi-i2s.c
index 4c23381727a1..af581a313a40 100644
--- a/sound/soc/adi/axi-i2s.c
+++ b/sound/soc/adi/axi-i2s.c
@@ -24,6 +24,7 @@
 #define AXI_I2S_REG_CTRL       0x04
 #define AXI_I2S_REG_CLK_CTRL   0x08
 #define AXI_I2S_REG_STATUS     0x10
+#define AXI_I2S_REG_PERIOD_LEN 0x18
 
 #define AXI_I2S_REG_RX_FIFO    0x28
 #define AXI_I2S_REG_TX_FIFO    0x2C
@@ -101,6 +102,17 @@ static int axi_i2s_hw_params(struct snd_pcm_substream 
*substream,
        return 0;
 }
 
+static int axi_i2s_prepare(struct snd_pcm_substream *substream,
+                          struct snd_soc_dai *dai)
+{
+       struct axi_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+       unsigned int period_bytes = snd_pcm_lib_period_bytes(substream);
+
+       /* adi_i2s counts 32-bit words, thus divide bytes by 4 */
+       return regmap_write(i2s->regmap, AXI_I2S_REG_PERIOD_LEN,
+                           (period_bytes / 4) - 1);
+}
+
 static int axi_i2s_startup(struct snd_pcm_substream *substream,
        struct snd_soc_dai *dai)
 {
@@ -147,6 +159,7 @@ static const struct snd_soc_dai_ops axi_i2s_dai_ops = {
        .shutdown = axi_i2s_shutdown,
        .trigger = axi_i2s_trigger,
        .hw_params = axi_i2s_hw_params,
+       .prepare = axi_i2s_prepare,
 };
 
 static struct snd_soc_dai_driver axi_i2s_dai = {
@@ -175,7 +188,7 @@ static const struct regmap_config axi_i2s_regmap_config = {
        .reg_bits = 32,
        .reg_stride = 4,
        .val_bits = 32,
-       .max_register = AXI_I2S_REG_STATUS,
+       .max_register = AXI_I2S_REG_PERIOD_LEN,
 };
 
 static int axi_i2s_probe(struct platform_device *pdev)
-- 
2.17.1

Reply via email to