Hi Tony, On Monday 20 August 2018 08:01 PM, Tony Lindgren wrote: > * Kishon Vijay Abraham I <[email protected]> [180808 06:35]: >> On Tuesday 05 June 2018 07:35 PM, Rob Herring wrote: >>> Really need 64-bit addresses and sizes? Use ranges to limit the >>> address space if possible. >> >> We now have address-cells as <1>, >> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/ti/k3-am65.dtsi#n49 >> >> However each PCIe instance has 2 data regions and one of the regions >> (PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1/PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 >> specified >> in the "MAIN Domain Memory Map" table of TRM >> http://www.ti.com/lit/pdf/spruid7) >> is above the 32bit region and requires 2 cells to specify the start address. >> This region is used to access MEM_SPACE of PCIe endpoint when operating in >> root >> complex mode and access memory of PCI root complex when operating in >> endpoint mode. >> >> In order to describe this, should we change the address-cells back to <2> or >> do >> you suggest any other alternatives? > > It's probably best to have the top level cbass interconnect use > #size-cells = <2> and then have it's child interconnects have > #size-cells = <1> if they don't need ranges above 4GB.
PCIe has a region starting at 0x40_00000000 and size 4GB. We need 2 address cells and 2 size cells to describe this no? > > BTW, what's the difference between all these three similar PCIE > ranges? > > PCIE0_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005500000 0x0005600000 1 MB > PCIE1_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005600000 0x0005700000 1 MB This is the register space for the two instances of PCIe controller. > > PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0010000000 0x0018000000 128 MB > PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0018000000 0x0020000000 128 MB > > PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4000000000 0x4100000000 4 GB > PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4100000000 0x4200000000 4 GB The above are regions which can be used by CPU/DMA to access the PCIe address space. The mapping from the above regions to the PCIe address space will be programmed in the PCIe controller. Thanks Kishon
