On Tue, 28 Aug 2018 at 11:04, Baolin Wang <baolin.w...@linaro.org> wrote:
>
> This patch adds the binding documentation for Spreadtrum SC2731 charger
> device.
>
> Signed-off-by: Baolin Wang <baolin.w...@linaro.org>
> ---
> .../bindings/power/supply/sc2731_charger.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
>
> diff --git
> a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
> b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
> new file mode 100644
> index 0000000..02b616c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
> @@ -0,0 +1,14 @@
> +Spreadtrum SC2731 PMIC battery charger binding
> +
> +Required properties:
> + - compatible: Should be "sprd,sc2731-charger".
> + - reg: Address offset of charger register.
> + - phys: Contains a phandle to the USB phy.
> +
> +Example:
> +
> + charger@0 {
> + compatible = "sprd,sc2731-charger";
> + reg = <0x0>;
Can you include also few lines of parent node? You use this "reg"
later as a base address so probably your parent node requires address
mapping. It would be nice to see it in example.
Best regards,
Krzysztof
> + phys = <&ssphy>;
> + };
> --
> 1.7.9.5
>
