Enable the i2c controller on ocelot PCB123. While there are no i2c devices on the board itself, it can be used to control the SFP transceivers.
Signed-off-by: Alexandre Belloni <[email protected]> --- arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts index 2266027759f9..ef852f382da8 100644 --- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts +++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts @@ -36,6 +36,12 @@ }; }; +&i2c { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + status = "okay"; +}; + &mdio0 { status = "okay"; }; -- 2.19.0.rc1
