[PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name

Tue, 04 Sep 2018 07:20:57 -0700 

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name use this here.

Signed-off-by: Andrew F. Davis <[email protected]>
---

Changes from v1:
 - Remove "fix" from commit message

 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi 
b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7fff3717cf7c..a0f5cfda0055 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -384,7 +384,7 @@
                AVDD-supply = <&reg_3p3v>;
                IOVDD-supply = <&reg_3p3v>;
                DVDD-supply = <&vgen4_reg>;
-               gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
        };
 
        accel@1c {
@@ -572,7 +572,7 @@
                AVDD-supply = <&reg_3p3v>;
                IOVDD-supply = <&reg_3p3v>;
                DVDD-supply = <&vgen4_reg>;
-               gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
        };
 
        touchscreen@20 {
-- 
2.18.0

Reply via email to