Running:
scripts/checkpatch.pl -f arch/arm/mach-s3c24xx/mach-mini2440.c
revealed several errors and warnings.
They were all removed, except one which is an #if 0 around the declaration
of a gpio pin. This needs some more investigation and I prefer to let it
here. This is not some dead code.
'printk' was replaced by 'pr_info'.
Signed-off-by: Cedric Roux <s...@free.fr>
---
arch/arm/mach-s3c24xx/mach-mini2440.c | 80 ++++++++++++++-------------
1 file changed, 43 insertions(+), 37 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c
b/arch/arm/mach-s3c24xx/mach-mini2440.c
index f9fc1f8d2b28..4a0bf6abba8c 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -64,8 +64,8 @@ static struct map_desc mini2440_iodesc[] __initdata = {
};
#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
@@ -104,8 +104,8 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg
__initdata = {
/*
* This macro simplifies the table bellow
*/
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
- _yres,margin_top,margin_bottom,vsync, refresh) \
+#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
+ _yres, margin_top, margin_bottom, vsync, refresh) \
.width = _xres, \
.xres = _xres, \
.height = _yres, \
@@ -128,7 +128,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[]
__initdata = {
[0] = { /* mini2440 + 3.5" TFT + touchscreen */
_LCD_DECLARE(
7, /* The 3.5 is quite fast */
- 240, 21, 38, 6, /* x timing */
+ 240, 21, 38, 6, /* x timing */
320, 4, 4, 2, /* y timing */
60), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
@@ -140,7 +140,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[]
__initdata = {
[1] = { /* mini2440 + 7" TFT + touchscreen */
_LCD_DECLARE(
10, /* the 7" runs slower */
- 800, 40, 40, 48, /* x timing */
+ 800, 40, 40, 48, /* x timing */
480, 29, 3, 3, /* y timing */
50), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
@@ -148,7 +148,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[]
__initdata = {
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN),
},
- /* The VGA shield can outout at several resolutions. All share
+ /* The VGA shield can outout at several resolutions. All share
* the same timings, however, anything smaller than 1024x768
* will only be displayed in the top left corner of a 1024x768
* XGA output unless you add optional dip switches to the shield.
@@ -158,9 +158,10 @@ static struct s3c2410fb_display mini2440_lcd_cfg[]
__initdata = {
_LCD_DECLARE(
10,
1024, 1, 2, 2, /* y timing */
- 768, 200, 16, 16, /* x timing */
+ 768, 200, 16, 16, /* x timing */
24), /* refresh rate, maximum stable,
- tested with the FPGA shield */
+ * tested with the FPGA shield
+ */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP),
},
@@ -196,7 +197,8 @@ static struct s3c2410fb_mach_info mini2440_fb_info
__initdata = {
/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
* and disable the pull down resistors on pins we are using for LCD
- * data. */
+ * data.
+ */
.gpcup = (0xf << 1) | (0x3f << 10),
@@ -232,10 +234,10 @@ static struct s3c2410fb_mach_info mini2440_fb_info
__initdata = {
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = NULL,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
/* NAND Flash on MINI2440 board */
@@ -254,7 +256,8 @@ static struct mtd_partition mini2440_default_nand_part[]
__initdata = {
[2] = {
.name = "kernel",
/* 5 megabytes, for a kernel with no modules
- * or a uImage with a ramdisk attached */
+ * or a uImage with a ramdisk attached
+ */
.size = 0x00500000,
.offset = SZ_256K + SZ_128K,
},
@@ -271,7 +274,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[]
__initdata = {
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
- .flash_bbt = 1, /* we use u-boot to create a BBT */
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
@@ -290,7 +293,7 @@ static struct s3c2410_platform_nand mini2440_nand_info
__initdata = {
static struct resource mini2440_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
- [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE),
};
@@ -362,7 +365,8 @@ static struct gpio_keys_button mini2440_buttons[] = {
},
#if 0
/* this pin is also known as TCLK1 and seems to already
- * marked as "in use" somehow in the kernel -- possibly wrongly */
+ * marked as "in use" somehow in the kernel -- possibly wrongly
+ */
{
.gpio = S3C2410_GPG(11), /* K6 */
.code = KEY_F6,
@@ -564,7 +568,8 @@ static char mini2440_features_str[12] __initdata = "0tb";
static int __init mini2440_features_setup(char *str)
{
if (str)
- strlcpy(mini2440_features_str, str,
sizeof(mini2440_features_str));
+ strlcpy(mini2440_features_str, str,
+ sizeof(mini2440_features_str));
return 1;
}
@@ -583,10 +588,10 @@ struct mini2440_features_t {
};
static void __init mini2440_parse_features(
- struct mini2440_features_t * features,
- const char * features_str )
+ struct mini2440_features_t *features,
+ const char *features_str)
{
- const char * fp = features_str;
+ const char *fp = features_str;
features->count = 0;
features->done = 0;
@@ -598,13 +603,14 @@ static void __init mini2440_parse_features(
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "screen type already set\n", f);
+ pr_info("MINI2440: '%c' ignored, screen type
already set\n",
+ f);
} else {
int li = f - '0';
+
if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
- printk(KERN_INFO "MINI2440: "
- "'%c' out of range LCD mode\n",
f);
+ pr_info("MINI2440: '%c' out of range
LCD mode\n",
+ f);
else {
features->optional[features->count++] =
&s3c_device_lcd;
@@ -615,8 +621,8 @@ static void __init mini2440_parse_features(
break;
case 'b':
if (features->done & FEATURE_BACKLIGHT)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "backlight already set\n", f);
+ pr_info("MINI2440: '%c' ignored, backlight
already set\n",
+ f);
else {
features->optional[features->count++] =
&mini2440_led_backlight;
@@ -624,13 +630,13 @@ static void __init mini2440_parse_features(
features->done |= FEATURE_BACKLIGHT;
break;
case 't':
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "touchscreen not compiled in\n", f);
+ pr_info("MINI2440: '%c' ignored, touchscreen not
compiled in\n",
+ f);
break;
case 'c':
if (features->done & FEATURE_CAMERA)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "camera already registered\n", f);
+ pr_info("MINI2440: '%c' ignored, camera already
registered\n",
+ f);
else
features->optional[features->count++] =
&s3c_device_camif;
@@ -645,7 +651,7 @@ static void __init mini2440_init(void)
struct mini2440_features_t features = { 0 };
int i;
- printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+ pr_info("MINI2440: Option string mini2440=%s\n",
mini2440_features_str);
/* Parse the feature string */
@@ -674,17 +680,17 @@ static void __init mini2440_init(void)
mini2440_fb_info.displays =
&mini2440_lcd_cfg[features.lcd_index];
- printk(KERN_INFO "MINI2440: LCD");
+ pr_info("MINI2440: LCD");
for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
if (li == features.lcd_index)
- printk(" [%d:%dx%d]", li,
+ pr_info(" [%d:%dx%d]", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
else
- printk(" %d:%dx%d", li,
+ pr_info(" %d:%dx%d", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
- printk("\n");
+ pr_info("\n");
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
--
2.18.0
