On Wed, 12 Sep 2018, Matti Vaittinen wrote: > On Tue, Sep 11, 2018 at 01:40:29PM +0100, Lee Jones wrote: > > On Wed, 29 Aug 2018, Matti Vaittinen wrote: > > > > > There is a HW quirk in BD71837. The shutdown sequence timings for > > > bucks/LDOs which are enabled via register interface are changed. > > > At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the > > > beginning of shut-down sequence. This causes LDO5/6 voltage > > > monitoring to detect under voltage and force PMIC to emergency > > > state instead of poweroff. Disable voltage monitoring for LDO5 and > > > LDO6 at probe to avoid this. > > > > > > Signed-off-by: Matti Vaittinen <[email protected]> > > > --- > > > drivers/regulator/bd71837-regulator.c | 19 +++++++++++++++++++ > > > > > include/linux/mfd/rohm-bd718x7.h | 33 > > > ++++++++++++++++++++++++++++++--- > > > > For my own reference: > > Acked-for-MFD-by: Lee Jones <[email protected]> > > I m not sure if it is relevant but I think this was already applied to > Mark's regulator tree.
Where is Mark's acceptance email? -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
