register_chrdev() always returns 0.
There is no need to check the return value.
Signed-off-by: Akinobu Mita <[EMAIL PROTECTED]>
---
arch/cris/arch-v10/drivers/pcf8563.c | 4 +---
arch/cris/arch-v32/drivers/pcf8563.c | 4 +---
arch/sparc64/solaris/socksys.c | 3 +--
drivers/block/acsi_slm.c | 3 +--
drivers/char/ip2/ip2main.c | 4 +---
drivers/char/mbcs.c | 7 +------
drivers/char/stallion.c | 5 +----
drivers/char/viotape.c | 7 +------
drivers/net/ppp_generic.c | 3 +--
sound/core/sound.c | 3 +--
10 files changed, 10 insertions(+), 33 deletions(-)
Index: 2.6-mm/drivers/net/ppp_generic.c
===================================================================
--- 2.6-mm.orig/drivers/net/ppp_generic.c
+++ 2.6-mm/drivers/net/ppp_generic.c
@@ -2684,8 +2684,7 @@ static void __exit ppp_cleanup(void)
if (atomic_read(&ppp_unit_count) || atomic_read(&channel_count))
printk(KERN_ERR "PPP: removing module but units remain!\n");
cardmap_destroy(&all_ppp_units);
- if (unregister_chrdev(PPP_MAJOR, "ppp") != 0)
- printk(KERN_ERR "PPP: failed to unregister PPP device\n");
+ unregister_chrdev(PPP_MAJOR, "ppp");
device_destroy(ppp_class, MKDEV(PPP_MAJOR, 0));
class_destroy(ppp_class);
}
Index: 2.6-mm/drivers/char/ip2/ip2main.c
===================================================================
--- 2.6-mm.orig/drivers/char/ip2/ip2main.c
+++ 2.6-mm/drivers/char/ip2/ip2main.c
@@ -425,9 +425,7 @@ cleanup_module(void)
printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n",
err);
}
put_tty_driver(ip2_tty_driver);
- if ( ( err = unregister_chrdev ( IP2_IPL_MAJOR, pcIpl ) ) ) {
- printk(KERN_ERR "IP2: failed to unregister IPL driver (%d)\n",
err);
- }
+ unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
remove_proc_entry("ip2mem", &proc_root);
// free memory
Index: 2.6-mm/sound/core/sound.c
===================================================================
--- 2.6-mm.orig/sound/core/sound.c
+++ 2.6-mm/sound/core/sound.c
@@ -451,8 +451,7 @@ static void __exit alsa_sound_exit(void)
{
snd_info_minor_unregister();
snd_info_done();
- if (unregister_chrdev(major, "alsa") != 0)
- snd_printk(KERN_ERR "unable to unregister major device number
%d\n", major);
+ unregister_chrdev(major, "alsa");
}
module_init(alsa_sound_init)
Index: 2.6-mm/drivers/block/acsi_slm.c
===================================================================
--- 2.6-mm.orig/drivers/block/acsi_slm.c
+++ 2.6-mm/drivers/block/acsi_slm.c
@@ -1025,8 +1025,7 @@ int init_module(void)
void cleanup_module(void)
{
- if (unregister_chrdev( ACSI_MAJOR, "slm" ) != 0)
- printk( KERN_ERR "acsi_slm: cleanup_module failed\n");
+ unregister_chrdev(ACSI_MAJOR, "slm");
atari_stram_free( SLMBuffer );
}
#endif
Index: 2.6-mm/drivers/char/stallion.c
===================================================================
--- 2.6-mm.orig/drivers/char/stallion.c
+++ 2.6-mm/drivers/char/stallion.c
@@ -4797,7 +4797,6 @@ static void __exit stallion_module_exit(
{
struct stlbrd *brdp;
unsigned int i, j;
- int retval;
pr_debug("cleanup_module()\n");
@@ -4820,9 +4819,7 @@ static void __exit stallion_module_exit(
for (i = 0; i < 4; i++)
class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
- if ((retval = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
- printk("STALLION: failed to un-register serial memory device, "
- "errno=%d\n", -retval);
+ unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
class_destroy(stallion_class);
pci_unregister_driver(&stl_pcidriver);
Index: 2.6-mm/arch/cris/arch-v10/drivers/pcf8563.c
===================================================================
--- 2.6-mm.orig/arch/cris/arch-v10/drivers/pcf8563.c
+++ 2.6-mm/arch/cris/arch-v10/drivers/pcf8563.c
@@ -180,9 +180,7 @@ err:
void __exit
pcf8563_exit(void)
{
- if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
- printk(KERN_INFO "%s: Unable to unregister device.\n",
PCF8563_NAME);
- }
+ unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME);
}
/*
Index: 2.6-mm/arch/sparc64/solaris/socksys.c
===================================================================
--- 2.6-mm.orig/arch/sparc64/solaris/socksys.c
+++ 2.6-mm/arch/sparc64/solaris/socksys.c
@@ -199,6 +199,5 @@ int __init init_socksys(void)
void __exit cleanup_socksys(void)
{
- if (unregister_chrdev(30, "socksys"))
- printk ("Couldn't unregister socksys character device\n");
+ unregister_chrdev(30, "socksys");
}
Index: 2.6-mm/arch/cris/arch-v32/drivers/pcf8563.c
===================================================================
--- 2.6-mm.orig/arch/cris/arch-v32/drivers/pcf8563.c
+++ 2.6-mm/arch/cris/arch-v32/drivers/pcf8563.c
@@ -193,9 +193,7 @@ err:
void __exit
pcf8563_exit(void)
{
- if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
- printk(KERN_INFO "%s: Unable to unregister device.\n",
PCF8563_NAME);
- }
+ unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME);
}
/*
Index: 2.6-mm/drivers/char/mbcs.c
===================================================================
--- 2.6-mm.orig/drivers/char/mbcs.c
+++ 2.6-mm/drivers/char/mbcs.c
@@ -817,12 +817,7 @@ struct cx_drv mbcs_driver = {
static void __exit mbcs_exit(void)
{
- int rv;
-
- rv = unregister_chrdev(mbcs_major, DEVICE_NAME);
- if (rv < 0)
- DBG(KERN_ALERT "Error in unregister_chrdev: %d\n", rv);
-
+ unregister_chrdev(mbcs_major, DEVICE_NAME);
cx_driver_unregister(&mbcs_driver);
}
Index: 2.6-mm/drivers/char/viotape.c
===================================================================
--- 2.6-mm.orig/drivers/char/viotape.c
+++ 2.6-mm/drivers/char/viotape.c
@@ -1098,15 +1098,10 @@ static int chg_state(int index, unsigned
/* Cleanup */
static void __exit viotap_exit(void)
{
- int ret;
-
remove_proc_entry("iSeries/viotape", NULL);
vio_unregister_driver(&viotape_driver);
class_destroy(tape_class);
- ret = unregister_chrdev(VIOTAPE_MAJOR, "viotape");
- if (ret < 0)
- printk(VIOTAPE_KERN_WARN "Error unregistering device: %d\n",
- ret);
+ unregister_chrdev(VIOTAPE_MAJOR, "viotape");
if (viotape_unitinfo)
dma_free_coherent(iSeries_vio_dev,
sizeof(viotape_unitinfo[0]) * VIOTAPE_MAX_TAPE,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
