From: Douglas Anderson <diand...@chromium.org>
[ Upstream commit 05e0c828955c1cab58dd71a04539442e5375d917 ]
If you do this on an sdm845 board:
cat /sys/kernel/debug/pinctrl/3400000.pinctrl/pinconf-groups
...it looks like nonsense. For every pin you see listed:
input bias bus hold, input bias disabled, input bias pull down, input bias
pull up
That's because msm_config_group_get() isn't complying with the rules
that pinconf_generic_dump_one() expects. Specifically for boolean
parameters (anything with a "struct pin_config_item" where has_arg is
false) the function expects that the function should return its value
not through the "config" parameter but should return "0" if the value
is set and "-EINVAL" if the value isn't set.
Let's fix this.
>From a quick sample of other pinctrl drivers, it appears to be
tradition to also return 1 through the config parameter for these
boolean parameters when they exist. I'm not one to knock tradition,
so I'll follow tradition and return 1 in these cases. While I'm at
it, I'll also continue searching for four leaf clovers, kocking on
wood three times, and trying not to break mirrors.
Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Signed-off-by: Douglas Anderson <diand...@chromium.org>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
Signed-off-by: Sasha Levin <alexander.le...@microsoft.com>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c
b/drivers/pinctrl/qcom/pinctrl-msm.c
index 0e22f52b2a19..2155a30c282b 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -250,22 +250,30 @@ static int msm_config_group_get(struct pinctrl_dev
*pctldev,
/* Convert register value to pinconf value */
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- arg = arg == MSM_NO_PULL;
+ if (arg != MSM_NO_PULL)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- arg = arg == MSM_PULL_DOWN;
+ if (arg != MSM_PULL_DOWN)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_BUS_HOLD:
if (pctrl->soc->pull_no_keeper)
return -ENOTSUPP;
- arg = arg == MSM_KEEPER;
+ if (arg != MSM_KEEPER)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_UP:
if (pctrl->soc->pull_no_keeper)
arg = arg == MSM_PULL_UP_NO_KEEPER;
else
arg = arg == MSM_PULL_UP;
+ if (!arg)
+ return -EINVAL;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = msm_regval_to_drive(arg);
--
2.17.1
