Add the card-detect and write-protect GPIO pins for OdroidXU3/XU4
SD card by adding pinctrl setting for wp-gpio pin and set it to
active low.
This also removes debug messages:
dwmmc_exynos 12220000.mmc: No GPIO consumer cd found
dwmmc_exynos 12220000.mmc: No GPIO consumer wp found
Suggested-by: Krzysztof Kozlowski <k...@kernel.org>
Signed-off-by: Anand Moon <linux.am...@gmail.com>
---
Fix the commit message and squash it with cd-gpios and wp-gpio
patches into single patch as suggested by Krzysztof.
---
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 8 ++++++++
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index dda8ca2d2324..9a39a0d8ec86 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -289,6 +289,14 @@
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
+
+ sd2_wp: sd2-wp {
+ samsung,pins = "gpc4-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ /* Pin is floating so pull it up to disable write-protect */
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
};
&pinctrl_2 {
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index a80b6c045154..2aacfb669140 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -498,10 +498,12 @@
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <200000000>;
+ cd-gpios = <&gpc2 2 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpc4 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
sd-uhs-sdr50;
--
2.17.1
