This patch changes the PPv2 IRQ names in the CP110 device tree to match
a corresponding change in the Marvell PPv2 driver. The reason this was
updated is the IRQ where names after Tx/Rx interrupts, but this is not
true and can be configured. A following patch will add more of them and
the names wouldn't make sense.
Signed-off-by: Antoine Tenart <antoine.ten...@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 840c8454d03e..6a13690cf1e4 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -53,8 +53,8 @@
<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1",
"tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
@@ -67,8 +67,8 @@
<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1",
"tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
@@ -81,8 +81,8 @@
<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1",
"tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
--
2.17.1
