Hi Antoine, On lun., sept. 24 2018, Antoine Tenart <[email protected]> wrote:
> This patch describes 3 additional interrupts per PPv2 port. Those > interrupts will be used later in future versions of the Marvell PPv2 > driver, and now the device tree description matches the hardware > capabilities. > > Signed-off-by: Antoine Tenart <[email protected]> Applied on mvebu/dt64 Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 21 ++++++++++++++++--- > 1 file changed, 18 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi > b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi > index 6a13690cf1e4..26d6e602d1ec 100644 > --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi > @@ -52,9 +52,14 @@ > <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "hif0", "hif1", "hif2", > - "hif3", "hif4", "link"; > + "hif3", "hif4", "hif5", "hif6", "hif7", > + "hif8", "link"; > port-id = <0>; > gop-port-id = <0>; > status = "disabled"; > @@ -66,9 +71,14 @@ > <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "hif0", "hif1", "hif2", > - "hif3", "hif4", "link"; > + "hif3", "hif4", "hif5", "hif6", "hif7", > + "hif8", "link"; > port-id = <1>; > gop-port-id = <2>; > status = "disabled"; > @@ -80,9 +90,14 @@ > <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>, > + <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>, > <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "hif0", "hif1", "hif2", > - "hif3", "hif4", "link"; > + "hif3", "hif4", "hif5", "hif6", "hif7", > + "hif8", "link"; > port-id = <2>; > gop-port-id = <3>; > status = "disabled"; > -- > 2.17.1 > > > _______________________________________________ > linux-arm-kernel mailing list > [email protected] > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
