On 09/27/2018 10:27 AM, Rob Herring wrote:
> On Thu, Sep 27, 2018 at 09:06:41PM +0530, Srinath Mannam wrote:
>> From: Pramod Kumar <[email protected]>
>>
>> Add binding document for supported thermal implementation
>> in Stingray.
>>
>> Signed-off-by: Pramod Kumar <[email protected]>
>> Signed-off-by: Srinath Mannam <[email protected]>
>> Reviewed-by: Ray Jui <[email protected]>
>> Reviewed-by: Scott Branden <[email protected]>
>> ---
>> .../bindings/thermal/brcm,sr-thermal.txt | 25
>> ++++++++++++++++++++++
>> 1 file changed, 25 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>> b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>> new file mode 100644
>> index 0000000..717617b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>> @@ -0,0 +1,25 @@
>> +* Broadcom Stingray Thermal
>> +
>> +This binding describes thermal sensors that is part of Stingray SoCs.
>> +
>> +Required properties:
>> +- compatible : Must be "brcm,sr-thermal"
>> +- reg : memory where tmon data will be available.
>> +- brcm,tmon-mask: A one cell bit mask of valid TMON sources.
>> + Each bit represents single TMON source.
>> +- brcm,max-crit-temp: Maximum supported critical temperature.
>
> We already have a defined binding for setting trip points.
Indeed, and if you have multiple TMONs, they would in premise possibly
each have a different critical trip point.
>
>> +
>> +Example:
>> + tmons {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x0 0x8f100000 0x100>;
>> +
>> + tmon: thermal@0 {
>> + compatible = "brcm,sr-thermal";
>> + reg = <0 0x40>;
>> + brcm,tmon-mask = <0x3f>;
>> + brcm,max-crit-temp = <105000>;
>> + };
>> + };
>> --
>> 2.7.4
>>
--
Florian
